Recent content by Kcbuckeye22

  1. K

    03 Yukon sometimes Doesn't start.

    I'll have her use the backup key when it happens again.
  2. K

    03 Yukon sometimes Doesn't start.

    Thanks I will have her try this when it happens again. Which could be tomorrow or next month.
  3. K

    03 Yukon sometimes Doesn't start.

    I have a 2003 GMC Yukon 5.3 4x4 that sometimes doesn't start. Put the key in turn it over and nothing. No crank. Try it a couple times and wait a couple minutes and then it starts up just fine. It might do this once a month or 4 times a week. I have been away and my wife is driving it, and...
  4. K

    Steering will jerk while cornering.

    It does it at any speed. Wet or dry. A Vehicle with a jerk when turning /cornering isn't fun to fight. I'll try the above suggestion on the EVO, and disregard your driving critique.
  5. K

    Steering will jerk while cornering.

    Thanks ill give it a try.
  6. K

    Steering will jerk while cornering.

    Posted speed was 70. ---------- Post added at 03:13 PM ---------- Previous post was at 03:10 PM ---------- Yep I replaced it. That one is at a better price too. Steering is fine other than the jerk. Not tight not loose. ---------- Post added at 03:14 PM ---------- Previous post was at...
  7. K

    Steering will jerk while cornering.

    I've replaced this. I did replace it before all other items were replace.
  8. K

    Steering will jerk while cornering.

    I have a 1999 tahoe 4x4 4 dr with 148k that has been the biggest money pit known to man. Once something is fixed it brings forth another problem. I replaced the pitman, idler, gear steering box, sway bars, steering speed sensor (on the steering column), brakes, rotors, new rims, tires, and a...
  9. K

    Fuel efficiency improvements

    I'm getting 13.2 on a new GM motor, new fuel filter, caps, rotor, wires, disturber, new air filter, and no AC running. 99 Tahoe 4x4 with 147 k miles, 265/75/16, bone stock. It would be nice to see 15 MPG. Makes me think I have something else going wrong with this money pit.
  10. K

    Encoder motor

    After looking it over I found that I didn't have one of the speed sensors all the way plugged in. Transfer case shifts fine, however the selector switch for the 4wd isn't lighting up. Fuse still? Selector itself?
  11. K

    Encoder motor

    I've posted this already but I'll see if I can get some answers. I replaced my 246 np8 transfer case in my 1999 tahoe and now I'm getting a service 4WD light and its stuck in 4wd. The selection lights for 4wd aren't working. I did not put the transfer case in neutral before removing the...
  12. K

    Removing the transfer case

    Ok this is kind of an update and a what's wrong now. I replaced my old transfer case with a used transfer case. I used my old TC motor on the used TC. Test drove it and the service 4x4 light is on and it's stuck in 4x4. I tried all the buttons and it stays in 4x4. The indicator light for...
  13. K

    Removing the transfer case

    Update! The transmission support cross bar needs moved for the transfer case to come out. Unbolt the 4 support cross bar bolts and two from the support rest. Jack up the transmission just a 1/4 inch, slide the support cross bar, and remove the transfer case. This process was not as easy as...
  14. K

    Removing the transfer case

    I've seen this posted already and find it impossible to believe that T-Case will fit. I wrestled with it for 30 minutes, she ain't coming unless the "cross member?" Comes out. Not saying it can't happen, because I may not have the correct tools.
  15. K

    Removing the transfer case

    I have a 99 Tahoe and I'm just making sure that there isn't a easier way. I'll have to remove the rear "body support?" To take it out right? The other support looks to be supporting the weight of the transmission.
See more

Forum statistics

Threads
129,270
Posts
1,813,070
Members
92,374
Latest member
fishcop076

Latest posts

Top