Recent content by Front Street

  1. F

    NorcalSS kit, broken DJM end links- help

    Thanks again! I actually just found the instructions shortly before you posted the link! Only took me two hours to get through old threads about instructions. The instructions are a must have when you're not looking directly under the truck! Also, I'm going to reach out to Tony about any...
  2. F

    NorcalSS kit, broken DJM end links- help

    Do you have any pictures of the end links installed, e.g. where the new hole should be drilled? I’m looking through old threads but it’s taking forever.
  3. F

    NorcalSS kit, broken DJM end links- help

    Thanks man!!
  4. F

    NorcalSS kit, broken DJM end links- help

    Toyo Proxes 305/40/22 But now I'm running 24"s with Nitto NT420's 305/35/24
  5. F

    NorcalSS kit, broken DJM end links- help

    Yep, the end link broke. I included a picture. So, I need a new end links. The question I have is: do I need the “s” shape link or would two straight end links like the factory set up still work? As we’re under the car the sway bar is symmetrical so we’re trying to remember why one end link is...
  6. F

    NorcalSS kit, broken DJM end links- help

    So, after 3 years with the NorcalSS 4-6 rear drop kit, free travel mod, the Belltech sway bar and DJM end links broke. I don’t want to buy them again because of this, but is there an alternative? Also, be passenger end link is off set and “S” shaped. Is there a reason for this? Do I need the...
  7. F

    Nali now 3/4 with Tony's parts & 24's

    Thanks again!
  8. F

    Nali now 3/4 with Tony's parts & 24's

    Thanks for the info. You see the bent rods because that's what McGaughy's instructions say to do in their kit. Last question, if my rods are rusted on, is there an easy place to order new ones other than the dealer that you know of?
  9. F

    Nali now 3/4 with Tony's parts & 24's

    Tony, we did the free travel mod already. The airride is working again, but it's going up too high. I already have the factory links for the sensors bent, do I need to get shorter ones? or are lower springs the real answer?
  10. F

    Nali now 3/4 with Tony's parts & 24's

    Don't get me wrong, I love the height right now, it's just my air shocks aren't working at all. So with a sensor replacement (free) we'll see what happens. If I don't like it, I'll take out the air ride, go with Belltech Street shocks (I like them on the front) then probably add the Airlift bags...
  11. F

    Building my LQ4 engine in my Denali XL

    Keep us posted! My LS guy also likes parts from Texas Speed, he used them in a TBSS build almost a year ago and the guy loves his engine. I'd love to hear what you go with to get the Torque you need. I too am going local for the build, which is always cool to help out our neighbors. Plus...
  12. F

    Nali now 3/4 with Tony's parts & 24's

    Thanks for the compliments guys! I'm going to get some measurements, but as Panchanga02 says, it closer to 5-6 right now. I do have a new sensor for the airride coming this week, so the rear will probably move up an inch or so. Now that I've done the suspension, minus a couple of things...
  13. F

    Please welcome CARiD.com to TYF.com

    Welcome, I just received my wheels and tires from them on Monday. Packaged very well with all the extras included, colormatched weights, lug nuts that fit, Balanced perfectly, Nitrogen filled and flawless wheels and tires. I'm very pleased with the end product. Thanks!
  14. F

    Kelderman air ride

    x2 but now I have that song in my head. :grumpycat:
  15. F

    Nali now 3/4 with Tony's parts & 24's

    I've had the Denali for 7 years and decided I'm keeping it so it's time to freshen it up. It was a 2/3 with McG spindles and their spring kit out back with Arnott Bilsteins and their Bilstein Air ride shocks in the back. Now it's still McG spindles but with the stock keys turned down a bit...
See more

Forum statistics

Threads
129,395
Posts
1,815,317
Members
92,582
Latest member
HSK76

Latest posts

Top