Recent content by D_R_C

  1. D_R_C

    Get a catch can before any mods.

    I would suggest going with CatchCans.com
  2. D_R_C

    Diy catch can install

    From what one membes said you could do both sides, he said the majority of the vapors at least 90% come from the driverside. The dealers refers the passenger side PCV as the clean air intake, the driverside PVC is the dirty air intake. This cleared it up for me to just do the driverside.
  3. D_R_C

    Diy catch can install

    You might ask this ? with a mechanic. With these gassers you only use the driver side PCV for the catch can. On diesels you vent out both-sides for the PCV open system or closed. IMO with a gasser I feel it would be better to use a CatchCan closed system. JMO.
  4. D_R_C

    Diy catch can install

    You can do it that way if you want, I did it that way to my Diesel. The reason for the catch can is you will pass emissions without any BS failure.
  5. D_R_C

    Anyone running an Air Lift 1000 kit on the rear of a '07+ Denali??

    I had sometime to kill so here you go. http://www.sdtrucksprings.com/index.php?main_page=product_info&products_id=18534 They say the shocks will NOT increase the load capacity they will just give you a smother ride. This is what they suggest to install to handle a higher load capacity...
  6. D_R_C

    Anyone running an Air Lift 1000 kit on the rear of a '07+ Denali??

    This might be a good ? to ask GM, unless someone else chimes in. I've only towed a empty UTV trailer one time with my Denali. My HD truck pretty much does all the towing. IMO, I doubt the air shocks would level out with that much tongue weight. I would be curious as to why air bags won't work on...
  7. D_R_C

    Anyone running an Air Lift 1000 kit on the rear of a '07+ Denali??

    The air shocks is the self leveling system, so when you turn the key on and the shocks air up that is the so called "Self Leveling System". As to why they say that kit will not work on a self leveling system, this would be a good ? to ask AirLift. http://www.airliftcompany.com/shop/60769/
  8. D_R_C

    Anyone running an Air Lift 1000 kit on the rear of a '07+ Denali??

    This Airlift Load Controller II will always keep at least 5 psi in the airbags. http://www.airliftcompany.com/shop/25592/ Shop around you can find it cheaper than the suggested price. I had mine on my last Diesel for 4 years and the same controller ( I removed it when I traded in) and put it on...
  9. D_R_C

    Diy catch can install

    One ounce ain't bad after 4K, but when the miles rack up and you have more blow-by then having a CC would be something everyone IMO should consider installing. Might as well install one sooner than later.
  10. D_R_C

    Diy catch can install

    I'm happy to help, glad you gots everything. :waytogo: I'm also disappointed with NO instructions, I had to read his vague online instructions a few times on which hose went where. It's pretty simple once you've installed one, but having a little more information before you install your...
  11. D_R_C

    Catch can question

    I've used Napa Gold oil filters for years in every vehicle I own with no problems, but in my book 2 strikes your out.
  12. D_R_C

    Catch can question

    Are you having lifter issues ? If your having dry starts when the engine is cold similar to when you do a oil change and you don't prime the oil filter. If your using a Napa Gold oil filter or any other brand oil filter then go back to using the A/C Delco. I had a problem with lifter clatter...
  13. D_R_C

    Diy catch can install

    The 3/8" ID fuel/vapor/PCV line is separate from the 5/8" ID asphalt coated cloth loom. You might try calling another Napa or the same one and ask for someone that knows something. I had the same problem with 2 Napa's on the cloth loom they did not know that anything like this existed. I...
  14. D_R_C

    Diy catch can install

    Just a FYI there are NO performance or mileage gains with this mod. But doing something to help control the PCV oil vapors from entering in the intake is a good thing. The dealers call it the dirty intake line as it pulls, thru vacuum the oil vapors from the driver side valve cover into the...
  15. D_R_C

    Diy catch can install

    If your talking about mounting on the master cylinder bolt, you use the same bolt and nut. Just remove the nut on the left side of the master cylinder, slide the catch can bracket on the bolt, put the nut back on and tighten it up. I first positioned the catch can on the bracket, tightened...
See more

Forum statistics

Threads
129,273
Posts
1,813,110
Members
92,381
Latest member
MTN_KDA

Latest posts

Top