2010 seats in my obs, full interior redo also!

[riviera rider]

get readdy for the thread :) getting the back bench seat tomorrow

black leather brand new :)

should be fun, gotta find a set of black leather front seats now

going to tear down the whole interior, including my dash, everything will go black, black carpet, gonna spray all the plastics black, black suede headliner, then im going to smooth and paint the dash kameleon to match the exterior


keep posted should start tear down this week!!!

[grnrpr68]

cant wait for the pics

[Jaycenk]

I have been thinking the same sort of rout with mine so yes deff post lots of pics and details on how it all goes together. I can't wait to see it.

[foreverfalcon40]

WOah Woah woah...make sure when ou hook up the front...post pics and specs on how to keep the heated an power seats functioning.

[riviera rider]

well i asked in the 07+ threads and they said the power is just forward/backward and up/down so im guessing ill only have to get power to the switch and everything will be all good. and for the heated i dont know if im even gonna get some heated one we shall see what i find but im going to pick up the rear bench today and i gotta find the front seats, i mite even do the centerconsol if i can find one cheap

ill definitely post alot of pics and info on how everything will work out, i cant start tearin down this week i promised a shop in the area id go to the carshow next weekend with them so next week i will start teardown and project find my 2 front seats for cheap! :) lol

post pics of the new bench seat later tonite :)

[riviera rider]

going to pick up the rear seat in 30 minutes :)

[Cartwright]

Sweet. Goodluck man. I out some 04 seatrs in my OBS and it was a pain but looked awesome afterwards. Looking forward to seeing yours.

[Bad bow tie]

I'm looking forward to your build thread as I am seriously condidering putting NNBS seats in my OBS as my leather seats are pretty beat up and cracked. So post up lots of pics and detail how you did the wiring and shit to make it all work. Should look tits all black.

[riviera rider]

got my rear seat today and home safe :) brand spankin new gotta love fresh leather!!!!!

got my friend looking for my front seats tomorrow and im gonna paint a car for him if he gets them for me so hopefully ill have the front asap!!!

i will take a ton of pics and detail how i did everything, not sure about the wiring yet until i get them in my actual possesion, im gonna start the teardown this week cuz im not gonna go to the show next weekend, so be ready im gonna get everything out and start messing with the back seat, so hopefully by next weekend i should have the back seat good to go

it doesnt look like it should be too much of a pain, but we all know how that goes

so keep posted for updates!!!

http://i197.photobucket.com/albums/aa276/southsidepromo23/0718101736.jpg

[sumo]

you wernt kidding Those look brand new

[riviera rider]

well as i was told they are from the police vehicles and they are pulled out b4 used, guessing they swap out the rear seats for something different, wish they swapped out the front lol

[drowndindreams]

wow, cant wait to see this. the bench seat looks kind of small compared to the width of the normal obs

[riviera rider]

there pretty much exactly the same width right around 56", the nnbs are taller however by a few inches, but that doesnt matter to me :)

[Billy_ocean04]

Sweet. Can't wait to see how it turns out

[sumo]

is it installed yet?

[riviera rider]

lol i wish they were, no i have to gut the interior and im going to be welding in a custom made bracket to the floor for the rear seats dont worry im going to be starting the tear down this week, and i will have MANY pics and info on what problems i run into

im still searching for the fronts got a guy that said he can get me both front leather seats from dealer for 1200$

[Tahoewhat]

:popcorn: Cant wait for all the pics

[bignick]

i wanna see this

[riviera rider]

tore out the rear seat tonite, wow already having problems, one of the torx heads stripped and literally snapped a corner off my torx so i had to have pops come out and cut it with the sawzall, well ya hes tryin to hit it with a hammer and snap the head and hits his hand so obviously starts bitching at me complaning im allways doing stuff in the dark, so ya i finished that off and got them out, tomorrow ill snap some pics of the test fit with the new rear seat and old one out


anyone want some obs blue leather seating???? not bad condition, drivers seat is a lil torn on the edge but heated full power both sides

[retorq]

tore out the rear seat tonite, wow already having problems, one of the torx heads stripped and literally snapped a corner off my torx so i had to have pops come out and cut it with the sawzall, well ya hes tryin to hit it with a hammer and snap the head and hits his hand so obviously starts bitching at me complaning im allways doing stuff in the dark, so ya i finished that off and got them out, tomorrow ill snap some pics of the test fit with the new rear seat and old one out


anyone want some obs blue leather seating???? not bad condition, drivers seat is a lil torn on the edge but heated full power both sides


YES!! Where are you located??

[riviera rider]

im in chicago if u can figure out a way to get it ill let it go cheap! like 250$ for both the front and rear

---------- Post added at 09:56 AM ---------- Previous post was at 08:51 AM ----------

well, first of im going to say is make sure you have someone to help u get the seat in the back or your going to mess up some plastics, i scraped the shit outta the new seat plastic which im going to have to sand and paint now, and i messed up my door panel pretty good


this is what rushing and trying to do it your self will do!!!!


but anyway got the rear seat in and wow its big, i think im going to have to cut into the floor to drop it down about 3"

besides that im inbetween on how it looks the bigness of it kinda throws off how i feel about it

http://i197.photobucket.com/albums/aa276/southsidepromo23/0720100925.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0720100926.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0720100926a.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0720100930.jpg

[LazyAssLou]

Wow, that seat is high!

[h0tr0d]

Would it be easier to make some custom mounts for it than cutting the floor? I think you're doing a great job, but I'd definitely modify the mounts before I hacked the body up.

Hey, look on the bright side, it might give the rear passengers a better viewing angle of the tv. :) "Yeah....uhh....that's how I designed it."

[riviera rider]

well id rather just cut the floor and weld in new metal than mess with the brackets, cuz as they are in there now they work the same as in the nnbs to where they fold down then flip all the way up

im just going to cut the floor and weld in new sheetmetal and make them drop about 3" cuz its just way to high for me right now

---------- Post added at 04:05 PM ---------- Previous post was at 03:46 PM ----------

UPDATE!!!!!\

just went outside and was looking at how i was gonna cut the floor to find out the floor in the tahoe has 2 layers where i wanted to cut it and the piece under the truck looks like its exactly where i wanted it 3" lower (right by the body mounts)

i think if i cut the top piece off inside and just do a little modification to the seat bracket it should drop the 3" i wanted and im going to see if i can push it back a little also


soooooo

looks like im going to have to tear everything out and pull the carpet up and start cutting to figure out what i need to do exactly :)

[drowndindreams]

SICKKK! IMO that thing looks great as it is, it looks like a wall hiding the 4 15s you have

[sumo]

it like stadium seating. nissan xterra has that feeling. kinda cool actually

[riviera rider]

its not bad if the people in back arent going to be 6ft, if i sit in the back my heads very close to the ceiling, so im gonna tear the full interior out and see if i can get it to drop about 2 inches in the back and maybe cut some of the bracket to actually move it back towards the rear a little more maybe 3 or 4 inches.

for me its no big deal cuz im not gonna be riding with people in back regardless, but id like to do it so that if anyone else wants to do this can fit people in there with no probs

gonna start tear down tomorrow after work

[riviera rider]

Playin with some suede, think this is the color im gonna do the door material in, both this area and the bottoms on all 4 doors plus the tailgate

remember the door panels will be black however not blue anymore when im done

http://i197.photobucket.com/albums/aa276/southsidepromo23/0724101719.jpg

[mikeyboy]

its coming out sick

[riviera rider]

found the front seats and a center consol just waiting on the guy to respond back to my offer, hoping he takes it :)

should have the whole interior out this week and gonna spray all the plastics next saturday, not sure if im gonna just spray the dash black or paint it, cuz i dontwant to paint over the airbag so i may just leave the whole interior black and just do the suede inserts on the door but use black suede on the headliner


we shall see how i feel

[nytahoe]

cant wait to c more pics. keep up the work michael!!!!!

[riviera rider]

got a guy coming to pick up my front seats for 200$ and another guy picking up my rear seats tomorrow for 200$ so now i got some more cash to spend on the front seats still waiting on this guy to respond to me bout the full set he had with a center consol


started tearing out plastics today and got some sound deadener on the rear doors :)
http://i197.photobucket.com/albums/aa276/southsidepromo23/0725101915.jpg

http://i197.photobucket.com/albums/aa276/southsidepromo23/0725101855.jpg

[drowndindreams]

more more more

[riviera rider]

getting it done little by litte i think i got a whole new set of seats front and rear outta 08 silverado front seats are the same as the tahoe but the rear seat is different and i think may work better waiting on the guy to call me back tomorrow :)


also ordered up 9" sun visor tvs and i got 2 6.5" monitors im going to be doing a custom install on the roof in the rear for them to be facing out the back for at shows

hoping to have the whole interior gutted by this weekend

heres more sound deadening and i got the front seats out and sold yesterday

http://i197.photobucket.com/albums/aa276/southsidepromo23/0726101901.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0726101829.jpg

[riviera rider]

payed for my seats from the 08 silverado today, so im getting the center console front 2 seats and the rear seat for 800$ shipped. cant wait for this shit to get here so i can figure out my install already.....

got my suede headliner in the mail today to find a sticker stuck on the material, now i gotta wait for these people to send me another fucking 3 yds of suede again and probaly wont get it by this weekend when i wanted it

[riviera rider]

UPPPDDAAATTTTEEEE!!!!!! :)

SEATS ARE SUPPOSE TO BE DELIVERED TOMORROW!!!!!!!!!!!! :), GOT MY NEW CARPET AND 9" SUNVISOR MONITORS IN THE MAIL TODAY, SUEDE HEADLINER COMING IN TOMORROW ALSO

SHOULD BE DONE IN ABOUT 2 WEEKS OR SO IM HOPING FOR COMPLETELY FINISHED INTERIOR :)




http://i197.photobucket.com/albums/aa276/southsidepromo23/0729101954.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0729101943a.jpg

[timjohnson22]

Man that is crazy!!!!!

[Brandon X]

How the hell did you not win truck of the month?

[riviera rider]

not a clue man i think i came im like 2nd to last even lol

o well! on to more mods and new toys lol

who knows what ill do next, prolly engine work

[jmyler]

haha i was wondering where you were doing the work. your shop looks like mine :)

[riviera rider]

lol i moved back into my pops house about 2 months ago and now the garage is full of shit from my house so i cant even do anything in the garage, so im doing it directly in front of the garage right now lol

heres the seats!!! not sure which back seat im using yet, its either the 08 crew cab silverado rear seat or 2010 tahoe rear seat, both are nnbs same design just the silverado one may end up working better cuz that tahoe seat i was definitly gonna have to cut into the floor to lower it down

http://i197.photobucket.com/albums/aa276/southsidepromo23/0730101648.jpg

http://i197.photobucket.com/albums/aa276/southsidepromo23/0730101649.jpg

[riviera rider]

dash is done and put back together doing the headliner tomorrow hopefully and then im gonna figure out how im doing the rear seat and figuring out which seat im using still

heres some pics :)

http://i197.photobucket.com/albums/aa276/southsidepromo23/0801101959a.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0801102006.jpg


also test fitted the center console and front seat, the damn motors are locked up, but as of now the seat is in great position for me so im not bothered by it

the centerconsole will be fiberglassed up front to meet the dash

i also left the center of dash the oem grey to match the steering wheel/column plus the center console has some grey where the cupholders are so i figured itd look good like that instead of completely black

http://i197.photobucket.com/albums/aa276/southsidepromo23/0731101130.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0731101104.jpg
http://i197.photobucket.com/albums/aa276/southsidepromo23/0731101544.jpg

[98hoe]

:jawdrop: u got sum skills an patience man... gud luck with everything, keep up the gud work... cant wait ta see it all done

[riviera rider]

thanks should have the headliner done today and back in, with the sunvisor tvs in too :) then on to the seats!!!!!!

[yukondoit]

Nice project you got going on there. Keep it up, its going to look pretty sweet when its completed.

[Tahoewhat]

Coming along nicely and pretty fast i must say.. Looking good.

[sumo]

looking good

[riviera rider]

gota doo some cuting of the frame on the rear seat then welding some shit to the floor then gonna get the carpet and seats in by this weekend hopefully

[riviera rider]

roof is deadened :) headliner tomorrow if i got time

http://i197.photobucket.com/albums/aa276/southsidepromo23/0803101821.jpg

[riviera rider]

soooooo ya picked up a 81 impala coupe and taking the 28s off my tahoe and painting it the same color as the tahoe, so the tahoe is on back order right now


buttt

cheap ass sound deadener all fell off the roof and bundled up on the floor, wat a waste of fucking money, ended up tossing it in the garbage, o well fuck it i aint competing anyhow got all new door weatherstriping installed on all 4 doors trying to find the rear hatch one somewhere still and trying to fix 2 leaks i got one in back and one up front by the windsheild i think, got some 3m urethane window sealer gonna hope that works so i can get some shit done

[mikeyboy]

its coming out sick gunna deffently be one of the coolst truck on here

[BlackLac]

Loving this. Can't wait for the pics when its finished.

[yukonaetahoe]

any updates?

[riviera rider]

na havent done much in the past 2 weeks, been working on my impala, should have the impala ready in 2 to 3 weeks then back to working on the interior


so far i got the headliner cleaned up and ready for the suede thats about it still gotta fuck with the back seat, got both of my window leaks sealed up and all new weather striping in the doors slowly but for surely its coming give me a month or so i should have the seats carpet and headliner all in then just gotta black out all the plastics and door panels

[Tahoewhat]

What you doing to the impala? (sorry if its above) pics?
edit, reread your painting it right?

[riviera rider]

doing a bunch of shit to it just like the tahoe haha

check out my cardomain page its got like 5 of my last whips that i did work too

http://www.cardomain.com/id/sickkhoe

the impala has daily updates usually except for tomorrow the shop is closed so i cant work on it :(

but that just means i can get my headliner finally done and back in the tahoe and get going more on that :)

[quietfly]

i'm wondering if the trying to swap 2006 seats in to a 95 would be as difficult.

[Done Deal DR]

i'm wondering if the trying to swap 2006 seats in to a 95 would be as difficult.

That is what I have now. It's not all that difficult, although my 92 came with them already installed.

He (previous owner) just drilled new holes in the floor pan, and used large bolts with an array of thick washers and it feels safe. The only downside is that it's a very tight fit on the passenger side. With the door closed you can't really adjust the seat on that side. LOL The driver side is fine, and I know that makes it seem like it's not even and was done 'wrong', but that's just how it works with where the tranny tunnel is on these OBS trucks.

[96ProCompTahoe]

That is what I have now. It's not all that difficult, although my 92 came with them already installed.

He (previous owner) just drilled new holes in the floor pan, and used large bolts with an array of thick washers and it feels safe. The only downside is that it's a very tight fit on the passenger side. With the door closed you can't really adjust the seat on that side. LOL The driver side is fine, and I know that makes it seem like it's not even and was done 'wrong', but that's just how it works with where the tranny tunnel is on these OBS trucks.


Pics?

[Done Deal DR]

Pics?

I'll try to get some within a day or two. The only pics I have at the moment are a couple exterior pics when I first got it and progression pics when I gutted the interior and redid everything, and the seats were out for that entire period.

[Done Deal DR]

http://i482.photobucket.com/albums/rr189/Done_Deal_DR/Blazer%20Interior/BlazerInterior.jpg
http://i482.photobucket.com/albums/rr189/Done_Deal_DR/Blazer%20Interior/BlazerInterior2.jpg

These aren't the best pics, I snapped them on my way into work this morning with my cell. I wasn't sure what you wanted pics of but let me know if you'd like to see something else. :Handshake:

[quietfly]

hmm i have the leather heated ones i wonder if i'd have to steal the electronics too

[Done Deal DR]

I'm not sure how that works, but I'm looking to swap these out with a leather set if and when I can find a decent deal on a set in good shape. I could care less about heated seats as I live in AZ. They are always heated regardless of my desire for them to be. :mad3:

[sanddperformance]

If they are memory seats good luck wiring them up all that craps runs through the drivers door module

[D-Block]

So what's the end result on the seat conversion? Did you get it done yet?

[Tahoewhat]

i think he was selling it? but im sure he finished it. idk

[mikeyboy]

the last post i saw from him he wanted to sell it

[chris.]

what kind of glue do you use? Ive tried a lot from 3m/krylon/all hobby lobby brands. I cant really find anything better than super77 or super90.

[Zooyork]

I was wondering what would any of you suggest...

I am doing a full stock floor body drop with a set of 24" and air suspension I was already told keeping my rear bench is a no. Due to the new wheel tubs and the center that needs to be lifted for the new drive shaft forming a center hump.

Only thing I could think of is new captian or bucket seats or a 80/20 split seat and just modd it and use the 80 any suggestions or ideas I dont want it to look odd with bigger seats in the front and tiny ones in the rear...

Any suggestions In would appreciate it thanks in advance...

[chris.]

I ve always like the idea of captians chairs in the front and back with a center console the runs from the dash to the rear seats. It'd conceal the DV and be unique...just my .02

[riviera rider]

sorry guys been so damn busy with my impala havent had much time to finish up the tahoe, but i should be back on it next weekend hopefully.... once i get the rear seat figured out it wont be much at all to get back together


but check out my impala i just finished up in the past 2.5 months from the ground up :)

http://www.cardomain.com/ride/3876009

[riviera rider]

started back on the interior, should have it mainly completed by this weekend, ill post pics tomorrow of whatever progress i get should have the back seat situated and possibly the front also

[riviera rider]

back at it should be done in the next 2 weeks compeltely blacked out and sounds installed with all the tvs...etc etc..

http://i197.photobucket.com/albums/aa276/southsidepromo23/1017101806.jpg


fully functional


http://i197.photobucket.com/albums/aa276/southsidepromo23/1019101744.jpg

and my sexy impala

http://i197.photobucket.com/albums/aa276/southsidepromo23/1018101754.jpg

[Brandon X]

Good news! And my god that impala is so beautiful lol. Is that a for sale sign on the back? How much you trying to get for it?

[Done Deal DR]

Any better pics of the rear seats?

I see these things for sale all the time for like $100. I have a 2dr but would like to see more of how you did it just for reference.

[Spencer2009]

Are those the rear seats from the tahoe or the silverado?

[Done Deal DR]

Are those the rear seats from the tahoe or the silverado?

I believe Tahoe.

[retorq]

Any better pics of the rear seats?

I see these things for sale all the time for like $100. I have a 2dr but would like to see more of how you did it just for reference.

You see rear seats form a 2010 Tahoe ALL the time for $100??

[riviera rider]

ya depending on what area your in you can get the 2010 tahoe rear seats in leather dirt cheap, here in chicago they are switching the 2010 tahoe's into police vehicles and removing the leather and replacing it with something else so they are on craigslist in flocks i paid 200$ for mine brand spanking new


and the back actually wasnt hard at all once i stopped thinking so hard about how to do it, i kinda rigged it up but i mounted the rear 4 bolts straight thru the floor, then for the front of the rear seat i used a piece of 2x6 ran it all the way across bolted it to the floor with 1/2 bolts then bolted the seat in the 4 oem spots straight thru the wood with 3/8 bolts


the fronts aint hard at all just making your own holes and using nut/bolts to lock em down

but you do have to get your seat belt latches replaced cus they are not the same


impala is for sale for 13000$ with the full stereo setup of the 4 15" shockwaves and shockwave amp i originally had in the tahoe a few months back or 10500$ as is needs minor shit for it to be compelted, guts are all done motors done up 350 wit mods

---------- Post added at 08:19 PM ---------- Previous post was at 08:17 PM ----------

http://chicago.craigslist.org/chc/pts/2017028593.html

theres one for 300$

[delock]

can you post better pics of the rear seats?

[Done Deal DR]

You see rear seats form a 2010 Tahoe ALL the time for $100??

Yes, they are on Craigslist constantly and look brand new.

[riviera rider]

what kind of pic of the rear seat would you like?

[Done Deal DR]

More pics of the mounting would be nice.

[riviera rider]

got u tomorrow if it dnt rain

[retorq]

Yes, they are on Craigslist constantly and look brand new.

Damn I gotta move out of the middle of no where ... :(

[riviera rider]

sorry guys no pics rained today, and i am putting a cam, roller rocker lifters and gear drive in my impala so set back for this weekend.

then i went to my mechanics to find out my friend got 2007 escalade seats front and rear buckets with the console and trying to do the same thing in his 2 door hoe, damn copy cat trying to one up me


ill get some work done when it stops rainin over here guys and post more pics

[tommie]

looks good.... lots of work....

[delock]

sorry guys no pics rained today, and i am putting a cam, roller rocker lifters and gear drive in my impala so set back for this weekend.

then i went to my mechanics to find out my friend got 2007 escalade seats front and rear buckets with the console and trying to do the same thing in his 2 door hoe, damn copy cat trying to one up me


ill get some work done when it stops rainin over here guys and post more pics

I would like to see pics of your friends 2dr. I'm about to do the same to mine

[Brandon X]

lmao your friend is trying to one up you? I think hes gonna have a hard time.

[riviera rider]

he hasnt even started on the 2 door he wanted to know how much i would charge him to do it and i told him its gonna be expensive cuz he's got everything for the seats, heated memory power seats with the brain box for it then he has the door panels from the escalade and wants me to get them to fit on his doors somehow so i hope hes ready to drop some damn cash on this project lol

[delock]

he hasnt even started on the 2 door he wanted to know how much i would charge him to do it and i told him its gonna be expensive cuz he's got everything for the seats, heated memory power seats with the brain box for it then he has the door panels from the escalade and wants me to get them to fit on his doors somehow so i hope hes ready to drop some damn cash on this project lol

Aww damn! He making it hard!

[quietfly]

he hasnt even started on the 2 door he wanted to know how much i would charge him to do it and i told him its gonna be expensive cuz he's got everything for the seats, heated memory power seats with the brain box for it then he has the door panels from the escalade and wants me to get them to fit on his doors somehow so i hope hes ready to drop some damn cash on this project lol

I've been thinking of swapping the seats from my 06 hoe into my 95 hoe. is the brain box for the seats just the door panel buttons or is it separate.

[riviera rider]

06 im not sure, where are your power seat buttons on the nnbs they are on the actual seat so u just have to run power to the switch, but not for the heated then u have to have the brain box and all that good shit, the seats i got are just power however my motors are jacked up so i need to get new motors or manual brackets

[quietfly]

06 im not sure, where are your power seat buttons on the nnbs they are on the actual seat so u just have to run power to the switch, but not for the heated then u have to have the brain box and all that good shit, the seats i got are just power however my motors are jacked up so i need to get new motors or manual brackets

the buttons to move the seat are on the side of the seat the buttons to heat the seat are on the door pannel...

[Done Deal DR]

Any update on the rear seat mounting pics?

[eatsleepdrey]

I live in the chcago area, what would you charge to do a similar swap on a 97 hoe??? not sure what year seats, most likely whatever is decently priced...
hell i have no real place to work on it, and id help with the build.:Handshake:
Also, do you put in a specific search word for craigslist to pull the 2010 seats??

what was the end result with the height of the rear seat?? did you lower them?? or leave as is?

Sorry for all the ?s but everday i get into my car and think about how bad i need to swap the seats:emotions122:

[Biggwaukegan]

you mike. I see you sold the hoe ...hate to see it go but that other chevy you pushin is nice. Im in the chitown area too up by wauktown. Lookin to get my shit painted soon too.

[Done Deal DR]

Wait, he sold this thing? How am I supposed to see the seat mounting now? LOL

[Bad bow tie]

Do you have any pics of the front seats and center console after the install? You never posted any and I would love to see how they worked out/fit in there. Checked your cardomain and didn't see any either

[riviera rider]

sorry guys havent been here in a while, but ya i had to get rid of the truck :(... ended up selling it because i needed the extra cash at the time to get my license back and finish up my other project.

heres some info for the guys that asked however

the front seats and center console looked and fit GREAT, the front of the console would need some type of custom fiberglassing to match up to the dash however nothing crazy or too expensive though.


the rear seats how ever were VERY tall. pretty much a 6ft tall person was damn near head on the ceiling. but it looked so nice it didnt matter lol

as for mounting the rear seat i sat the bracket up on the the hump and it lined up perfectly across the floor and drilled holes and ran bolts/nuts straight through. and for the front of the rear seat under neath i ran a 2x6 across the floor and had pieces on each end (which i was going to cover all in black carpet to match the floor) and bolted the 2x6 directly to the floorboard then the seat to the wood. it actually wasnt too hard once i figured that out.

you could probaly use some sort of metal fabrication as well but i dont have a welder since the shop i worked at closed down ...

heres some pics from the guy he finished up the install and got everything finished up blacked out this is the only pic he sent me


and to anyone in the area that is looking for paint or help doing the install get at me shoot me text or call when ever ya want

708 937 3120

i will have my booth built in my garage and ready to spray within a few weeks :)


http://i1116.photobucket.com/albums/k576/Mccustoms1/164712_578258475224_200302890_32975148_7337150_n.j pg

[96ProCompTahoe]

to bad you don't have more pics! looks pretty good but your right, those back seats are really up there.

[gulleyman]

Dude.....I love truck porn...gotta go shower now :manos:

[riviera rider]

to bad you don't have more pics! looks pretty good but your right, those back seats are really up there.



he should be at a few car shows this year im guessing so ill snap some pics when i see him around

[riviera rider]

SORRY FOR THE DELAY HERES SOME PIC OF HOW THE TAHOE SITS NOW!!!!

HE REMOVED THE BODY LIFT AND PUT IT ON SOME 26S AND I PAINTED A ROLLPAN AND ALL THE RIM INSERTS FOR IT ALSO SOME INTERIOR SHOTS

http://i1116.photobucket.com/albums/k576/Mccustoms1/248886_1600174463613_1813608885_996494_3709680_n.j pg

http://i1116.photobucket.com/albums/k576/Mccustoms1/290648_1761575778545_1813608885_1152163_1987940_o. jpg

http://i1116.photobucket.com/albums/k576/Mccustoms1/223075_1709450315441_1813608885_1094584_1175857_n. jpg

http://i1116.photobucket.com/albums/k576/Mccustoms1/249260_1709455115561_1813608885_1094595_7561293_n. jpg

http://i1116.photobucket.com/albums/k576/Mccustoms1/284770_1709453835529_1813608885_1094592_7594081_n. jpg

[crxx]

where did you get the center console from? im lovin that!

[felixgun]

Looks like a factory gm brushed aluminum center console from 07+ GMT900 vehicles.

[billowred]

Damn nice work!

[edgaranah1]

That is a sick ride. love the interior. That must of been some hard work.


Sent from my iPhone 4g using Tapatalk

[96GMCYukonGT]

what did you use to paint the interior plastics?

[DefendHawaii]

I like the center console. Rest of it looks good not at all my taste I would spend the money dropped on all that bling garbage on a newer vehicle but you got some great skills with building rides up..

[riviera rider]

center console came from a 08 chevy pickup if i remember correctly


my buddie who owns the truck me and him are in the same car club now and he might be putting a nnbs front end on the truck... ill have pics of the truck over spring and summer to update for you guys!