Z71 rear cool swap lift

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TWITCH101

Full Access Member
Joined
Jan 20, 2011
Posts
261
Reaction score
0
So I bought some z71 coil springs off eBay to lift my rear suspension a little bit and give me a little stiffer ride. Got them installed and now they rub the frame rail on the passenger rear side. Anyone ever have this issue?
 
OP
OP
TWITCH101

TWITCH101

Full Access Member
Joined
Jan 20, 2011
Posts
261
Reaction score
0
No leaf springs in the rear. Idk if I was sold the wrong springs or what. I sprayed some wd-40 on the spot where they rub and it is a lot quieter now. It was making a ton of noise before. They seem to be seated properly.
 

YukonXL04

The Riverboat
Supporting Member
Joined
Sep 3, 2013
Posts
2,489
Reaction score
175
Location
Arlington, TX
Sounds to me like your axle isn't centered under the body... Measure and check
 
OP
OP
TWITCH101

TWITCH101

Full Access Member
Joined
Jan 20, 2011
Posts
261
Reaction score
0
What is there to measure? I really don't know how to measure to see if the axle is straight.
 

YukonXL04

The Riverboat
Supporting Member
Joined
Sep 3, 2013
Posts
2,489
Reaction score
175
Location
Arlington, TX
Measure if your tire is the same distance from the fender on both sides
 
OP
OP
TWITCH101

TWITCH101

Full Access Member
Joined
Jan 20, 2011
Posts
261
Reaction score
0
So I crawled under the yukonand took a look and it seems like the springs themselves have shifted. It looks like the rubber spacers that meet the spring on the body are moved or not sitting flush. Any ideas?
 

Forum statistics

Threads
129,127
Posts
1,810,890
Members
92,215
Latest member
mitchievu
Top