Wife surprised me with some swaybars for Christmas

[Doubeleive]

MrsMonte must like you. I'm jealous of your Hellwig sway bars. I have done the Belltech 2/3 drop on my Suburban about a year ago and I have been trying to find the rear Hellwig sway bar but everybody has it on back order. Every time I order one the order gets canceled.

sd truck springs is hellwigs main distributor

 

[Joseph Garcia]

Are you using the stock endlinks for the rear Hellwig sway bar?

You can use stock end links for the front sway bar.

 

[slupie]

sd truck springs is hellwigs main distributor

I know, I called them in November and they told me that the Hellwig 7740 is on back order and they will drop ship it once it is available from Hellwig. I found few on eBay earlier this week and took a chance at ordering it and it came in on Friday. I just have to order the front one now and wait for a weather break in the land of rust and corruption.

 

[MrMonte]

I have already put 5,000 miles on my lowered + Hellwig swaybar setup and still loving the transformation. No rubbing/noise from the swaybars so far.

Here are some pics after I adjusted the supplied endlinks to the rear Hellwig swaybar. I ended up removing the lock nut and making the rear links as short as possible and the rear swaybar is close enough to being parallel to the ground for me. I did spray some WD40 on the endlinks to make the adjustment of those long treads go easier + I just hit the 80K mile mark on my Yukon underside is well passed due for a detailing.

 

[Danyi2170]

I have already put 5,000 miles on my lowered + Hellwig swaybar setup and still loving the transformation. No rubbing/noise from the swaybars so far.

Here are some pics after I adjusted the supplied endlinks to the rear Hellwig swaybar. I ended up removing the lock nut and making the rear links as short as possible and the rear swaybar is close enough to being parallel to the ground for me. I did spray some WD40 on the endlinks to make the adjustment of those long treads go easier + I just hut the 80K mile mark on my Yukon underside is well passed due for a detailing.


View attachment 392489View attachment 392490View attachment 392491

Looks like you also adjusted the sway bar. How does the new position feel compared to when you had it in the middle?

 

[OR VietVet]

I am curious about the difference, since I am in the middle and have yet to adjust to the stiffer setting for a roadtest. I think if I do that, I will also need to air up my tires too.

 

[MrMonte]

Looks like you also adjusted the sway bar. How does the new position feel compared to when you had it in the middle?

I had no complains with the middle position but the inner position has a better feel to it. It's still so impressive how well the Yukon handles now and I drive on curvey backroads often.

 

[GranPrix]

What's the part number for the rear bar? I only see the front on their website...

 

[Doubeleive]

What's the part number for the rear bar? I only see the front on their website...

7740 FOR THE 2015-2020

 

[MrMonte]

I adjusted my rear ride height sensors which dropped the rear 3/4" which make the ride even better. Now from fender to ground I'm Front 34", Rear 35 1/4"