What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?
- Thread starter soulsea
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Super compared with the regular factory bulbs not even close.
What about the fogs?
Sent from my Pixel 2 XL using Tapatalk
So at 0400 I went to drive to work and the heads started flickering. 2 flickers and they extinguished. Threw a CEL.
The engine running provides some sort of electrical loop. Didn’t happen last night while testing with engine off and just the switch
Spent 30 minutes in the dark putting original H11 bulbs back in and pulling CEL codes. Not happy
Going to contact the seller and see what they say. The directions mention some vehicles will require an anti-flicker module
The fogs are foglight specific bulbs. They appear to be brighter. But I can’t tell a real difference. I’m probably going to swap them to an actual hi/low H8 LED bulb to get some more lumens
The engine running provides some sort of electrical loop. Didn’t happen last night while testing with engine off and just the switch
Spent 30 minutes in the dark putting original H11 bulbs back in and pulling CEL codes. Not happy
Going to contact the seller and see what they say. The directions mention some vehicles will require an anti-flicker module
See above about the heads
The fogs are foglight specific bulbs. They appear to be brighter. But I can’t tell a real difference. I’m probably going to swap them to an actual hi/low H8 LED bulb to get some more lumens
I have LED on my fogs, and they look super bright plus factory HID I'm satisfied with the front lighting.
Sent from my Pixel 2 XL using Tapatalk
Joey.Donatelli
TYF Newbie
Ok boys and girls!
Took delivery of my new 2019 RST on Tuesday. I told the dealer not to touch it! I wanted to detail it on my own and make sure it was done right.
I could not believe how much iron was all over this thing. I am in Kansas and I know that they put these on the train but my god it was bad!
Got the windows tinted yesterday but haven't had any sunlight to take good pictures. Also, I am installing HIDs and LEDs today.
Took delivery of my new 2019 RST on Tuesday. I told the dealer not to touch it! I wanted to detail it on my own and make sure it was done right.
I could not believe how much iron was all over this thing. I am in Kansas and I know that they put these on the train but my god it was bad!
Got the windows tinted yesterday but haven't had any sunlight to take good pictures. Also, I am installing HIDs and LEDs today.
Last edited:
Looks good, we demanding pics as soon as possible.
[emoji851]
Sent from my Pixel 2 XL using Tapatalk
Joey.Donatelli
TYF Newbie
LT1ZOB
Full Access Member
- Joined
- Jul 10, 2018
- Posts
- 408
- Reaction score
- 504
Did the same as you on my vette Joey, asked the dealer to not touch a thing. Brand new, put in about 50 hrs of clay, paint correction (orange peel), then finally ceramic coated it. I went through several bars of clay, all completely covered in iron.
Tk59194
Full Access Member
- Joined
- Dec 29, 2017
- Posts
- 345
- Reaction score
- 338
Yup, same with my factory ordered 18 Tahoe. I used iron-x then clay. Full of debris. They do get super dirty on the rail.
was bored today and decided to fix a factory mistake for the non-LTZ models
DIY to make your LS/LT headlights to LTZ function
I'd love to hear thoughts/ideas about this. It works great, cannot find any negative at the moment.
DIY to make your LS/LT headlights to LTZ function
I'd love to hear thoughts/ideas about this. It works great, cannot find any negative at the moment.
Similar threads
