The twin hoes

[Sparksalot]

I have the same air pump. I also hate that screw on tip. I used to have a pump with one of those locking chucks instead of the screw on tip. Much better setup.

I’m thinking I’ll need to find a right angle chuck for it.

 

[Sparksalot]

More love for thecopcar today. I finally decided to mechanically replace the steering position sensor. A new one has been plugged in and hanging under the dash for two years. After a couple of miles at highway speed the bcm says hold on now, and flashes the service stabilitrack message.

The culprit.



Nope, not gonna spin. Wouldn’t be prudent.



here ya’are, getcherdash parts.



the heater duct was in the way.

 

[Sparksalot]

The Secure Idle was kinda in the way. So were a couple of ground lugs for it.



Dont mind me, just hanging around.

 

[Sparksalot]

Now both of the twins have fire extinguishers. I chose an Element for Thethirdtwin due to space. It doesn’t have a cargo barrier to use, like thecopcar.

 

[Sparksalot]

Santa brought some amber strobes for Thethirdtwin. I’ll run a cable for them above the headliner when I install the roof rack.

View attachment 388081

Installed the front amber strobes and ran the wiring. Still determining the controller location.




The bar in the windshield is also amber. I hid the cable for it today.

 

[89Suburban]

Installed the front amber strobes and ran the wiring. Still determining the controller location.

View attachment 389667


The bar in the windshield is also amber. I hid the cable for it today.

View attachment 389668

Got a link for those push bar strobes? What are you using for a controller?

 

[89Suburban]

I discovered the new wheels on Thethirdtwin present a challenge for airing down and back up again.

the valve stem position makes it a PITA for the Viair compressor hose. Getting my air down tool in there, fuggetaboutit.

View attachment 388406View attachment 388407View attachment 388408

Why is the valve stem ripped?

 

[Sparksalot]

Got a link for those push bar strobes? What are you using for a controller?

This is the controller I’ll use.

https://smile.amazon.com/dp/B018UJHVEA?psc=1&ref=ppx_yo2ov_dt_b_product_details

The strobes

https://smile.amazon.com/dp/B00SZL3MFQ?ref=ppx_yo2ov_dt_b_product_details&th=1

push bar and rear plate brackets

https://smile.amazon.com/dp/B06WP6GPFJ?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://smile.amazon.com/dp/B06WLM7RJL?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[Sparksalot]

Why is the valve stem ripped?

I never noticed it until I took the pic. It’s cosmetic at least.

 

[Sparksalot]

I told myself I wasn’t gonna bother on thethirdtwin. But it was on sale….