Switchback DRL/Turn signal bulb help

[JML07denali]

Just bought some 3157 LED switchbacks white/amber bulbs for my parking/turn signals with load resistors. I have 5 wires coming out of the socket. Which two colored wires do I tap into? Thanks in advance!


Sent from my iPhone using Tapatalk

 

[kbuskill]

I don't know the colors off the top of my head but if you have a test light or volt meter you want to tap one side of the resistor to ground and the other side to the turn signal positive lead.

 

[Graystone_OG]

Should be connected to the black wire (Ground) with the blue with white stripe wire (Turn signal).