Pop the valve cover back off and check to see if all the pushrods are centered in the hole through the head. I have done a bunch of these where the lifter stuck at some point, it bent the pushrod, but then the lifter unsticks. When looking for the ticking the rocker will still move up and down and appear normal, but the pushrod rubs on the cylinder head.
Sounds Like Lifter Tick but Rockers All Moving
- Thread starter nickbeckss
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Similar threads
