Seat belt photos/measurements needed please

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ppvfan

Member
Joined
Jun 30, 2021
Posts
61
Reaction score
65
Location
Ontario, Canada
My seat belt problem just keeps getting worse. The local Chevy parts guy ordered the RH and LH buckle ends for the 2016 2nd row seat that I have in my 2014 PPV. They are too narrow and do not fit the seat belt tongue.

I'm trying to narrow down what the problem is.

Do I need different buckle ends?
Do I need different seat belts?
Do I need a 2014 2nd row seat?

Here's what my 2014 2nd row RH and LH seat belt tongues look like.

2016-seat-belt-tongue.jpg

Can anyone confirm that the 2015-2020 2nd row belts are the same?

Here's the LH seat belt mount. It has a 90 deg bend. There's a buckle end attached but it's mangled and too narrow for the belt tongue.

lh-seat-belt-mount.jpg

Here's the RH mount. Looks like it should come straight out.

rh-seat-belt-buckle-mount.jpg

This whole thing is driving me nuts. I can't get the safety inspection done until this is conquered. The family is on my case about this as the AC quit on our other vehicle.

Any info or suggestions are appreciated. Even universal buckles that would fit a 1" wide tongue.

Thanks.
 

STORMIN08

Full Access Member
Joined
Nov 21, 2011
Posts
974
Reaction score
459
i would try to source the 2014 receiving ends, the 14 and 16 were different models and may different suppliers. if the seat works, leave that, just remove the buckle ends and swap them to fit your model year
 

Forum statistics

Threads
128,781
Posts
1,805,301
Members
91,760
Latest member
MyCleftNut

Latest posts

Top