Running woes

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
T

Th8nos

TYF Newbie
Joined
Jun 13, 2022
Posts
12
Reaction score
11
Might not hurt to check your ground connections and wire conditions as well.
I know this is old but I just gotten back to my truck. OK here goes; I've got everything wired up also with a push start alarm system. I can crank it if I jump the relay but not start. Its getting fuel no problem. If I put it in neutral it will crank from the switch but not start. I have no headlights and I've checked everywhere for the lamp module that my schematics says it could be. No dice. Another odd thing I saw was when I activate my alarm the push start button goes off as it should but comes back on 2 secs later like in acc mode. I know I'm missing something, I just need some expert advice on what it could be
 

exp500

Full Access Member
Joined
May 14, 2017
Posts
1,788
Reaction score
1,618
Test results at solenoid wires would help. A few tests in key locations will narrow scope considerably.
 

Forum statistics

Threads
129,210
Posts
1,812,221
Members
92,309
Latest member
ylwdogs
Top