Rear Widow Defogger Wire...
- Thread starter Yukon John
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dbbd1
Full Access Member
- Joined
- May 12, 2017
- Posts
- 924
- Reaction score
- 354
Before-
After-
Hey! I finally remembered to do it.
I took a heat gun to it (at about 350*-400*). Stretch the cable out, after disconnecting it from the window. With it stretched, applying heat, you can see the coils relax. Keep it stretched until it cools.
After-
Hey! I finally remembered to do it.I took a heat gun to it (at about 350*-400*). Stretch the cable out, after disconnecting it from the window. With it stretched, applying heat, you can see the coils relax. Keep it stretched until it cools.
Last edited:
OP
OP
Yukon John
Full Access Member
OK...I went with the Permatex product:
...cost about $15 at Advanced Auto...followed instructions...let it dry 24 hours...and hooked it back up. Works as advertised.
...cost about $15 at Advanced Auto...followed instructions...let it dry 24 hours...and hooked it back up. Works as advertised.
dealership resoldered mine as well
itsbo1313
Full Access Member
So I ended up buying a soldering iron kit from amazon for $20 https://smile.amazon.com/gp/product/B06XZ31W3M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
and soldered it back on. Pretty easy, cheaper solution and I have a new soldering iron.
I'll let you know how it works when it gets cold enough in Hemet.
and soldered it back on. Pretty easy, cheaper solution and I have a new soldering iron.
I'll let you know how it works when it gets cold enough in Hemet.
Similar threads
