Power steering pump hoses to oil cooler

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

crabbman

Full Access Member
Joined
Nov 19, 2015
Posts
113
Reaction score
28
Location
GYPSUM,COLORADO
i believe i need to replace these hoses and do not have a clue how to do it.
Cant believe You Tube failed me.
how do i start this?
CANNOT STAND THE OIL ALL OVER EVERYTHING
Power steering oil is dangerous to all of us and cars
a 2002 gmc yukon slt,5.3, four wheel drive
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,148
Reaction score
25,183
Location
Treasure Coast, Florida
Well, run your VIN through the link below and see what parts are available and that will kinda show you what needs replacing. I think you might want to replace the cooler too and if the pump housing and reservoir is really rusty, replace that as well with a NEW one. Might need some line wrenches and a good amount of PB Blaster to get the lines loose for replacement.

https://parts-catalog.acdelco.com/catalog/catalog_search.php
 
Last edited:
OP
OP
crabbman

crabbman

Full Access Member
Joined
Nov 19, 2015
Posts
113
Reaction score
28
Location
GYPSUM,COLORADO
well, i did another search on all four hoses and found that they are perfectly fine. what was not fine was one of the power steering box to power steering pump hose was not fastened done tight at all and there was my leak. so be a hunter and investigator for a very long time to verify the problem before you head out to part store to be embarrased.
 

Forum statistics

Threads
129,211
Posts
1,812,246
Members
92,313
Latest member
kylesimmons
Top