SynnerD
TYF Newbie
- Joined
- May 7, 2022
- Posts
- 14
- Reaction score
- 26
Ok had the known codes pop up a couple weeks after an oil change. Unaware of the oil used and it had an STP filter. So I changed the oil put in Mobile 1 synthetic and the update UPF48R delve filter. Fired it up. Still no pressure on the gauge and still p0523 code. Replaced the sensor. Lasted for 2 days. (DORMAN sensor) then it happened again. Decided to drop the pan and replace the O-ring. Fired up the Yukon and still had the P0523. Soooooo went and bought yet another sensor. This time a carquest premium. Cleared codes and pressure started reading. Right up to 40 bars at idle. The screen has been removed under the sensor. A GM tech told me they never replace them. My question code the o-ring failure damage the sensor? I’m at a loss and about to burn it down.
Oil pan was clean. No sludge. For 135k she was real clean inside it.
Oil pan was clean. No sludge. For 135k she was real clean inside it.