Looking into SAS swap for 99 tahoe

[Saodrin]

So i decided to skip the little 3-6 inch lifts and just save my money to do a sas and run like 37 inch tires. could anyone give me any info on what ill need and places to get the things required

 

[99COOP]

if you have to ask you might be getting in over your head.

 

[992door]

Go over to fullsizechevy.com and GMFS and do some searching.

 

[BlackedOutHoe]

but search before you ask questions or you will get flamed like no other.

I agree you might be biting off more than you can chew. Can you weld?

 

[Saodrin]

but search before you ask questions or you will get flamed like no other.

I agree you might be biting off more than you can chew. Can you weld?

yes i can weld and ive been researching this for a while now

 

[blackcoffee]

Your most likely better off finding a place that will do it for you. I remember I saw a Ford Ranger with SAS awhile ago it was bad to the bone. They had someone do it here in florida. I'll try and remember.

 

[fyremanpat]

pretty much everything from the transfer cases forward is removed/cut off. I dont think theres any stock suspension used over.

 

[rucr8z2]

you can get most of the hardware from ORU.com including all brackets that bolt on, shocks, leaf springs and hydraulic assist crossover steering. The only thing you would need would be an axle, custom driveshaft and a different transfer case - the autotrac cases wont act right.....LOL