****** long tubes :)

[haks310]

Yeah, from what I heard it takes a lot of back and forth to get the chip right. You also have to do a lot of data logging on your own and send it to him.

The standard chip, FastChip offers, is just that, a standard chip. It is just tuned to get the best out of basically a stock '95 TBI. They offer different "stages" , e-mail them, Ed Wright will tell you what the best route would be.

 

[AtomicHoe094]

ill give him a buzz soon. but i just read up on TBIchips, you have to have a intake and cam change, which is weird. Im hoping to find a 454tbi around here :/

 

[haks310]

LoL you have to?

A custom chip on a TBI will be a waste unless you are changing a lot of parameters and have a lot of engine work done.

 

[AtomicHoe094]

ill give him a buzz soon. but i just read up on TBIchips, you have to atleast a cam change, which is weird. Im hoping to find a 454tbi around here :/

http://cgi.ebay.com/ebaymotors/Cust...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

This is a custom chip for the 93-95 GM 1/2 ton Trucks with modified 350 engines. ALL specs must be specified with payment and preferrably prior to payment so that we can make sure you have everything covered to support your engine. I have this chip for either the 5spd or automatic transmission. I will also need the 4 letter code from the original chip and likely the gear ratio and tire size for recalculating shift points on the automatic transmissions.

The amount of power gain from stock or other aftermarket chips is impossible to give as by the time you get to this chip the motor will run terrible with the other chips.

At least a cam change is required with this chip in addition to exhaust and air intake modifications. Check out www.tbichips.com/truckmods.htm and email or call me with any questions.

 

[haks310]

Yeah, I'd rather go with Ed Wright. LoL

 

[AtomicHoe094]

well i bought the headers today, 330bucks shipped to my house!! woowhoo!!
haha ill letcha all know whats going on with them.. i love motor mods! lol

 

[99COOP]

i'm jealous, trade you my custom rusted stock ones if you cover shipping?

 

[AtomicHoe094]

hey 99whipple.. how does the truck sound? have any clips? did you make your x pipe? should i go with a h or x?? help me out here man! lol

---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------

i'm jealous, trade you my custom rusted stock ones if you cover shipping?

hahah sure! damn i should of bought these when i first dropped my motor in, i spent like 400 bucks jsut on getting new manifolds and the extension pipe.. doh!

 

[Whippled2dr]

hey 99whipple.. how does the truck sound? have any clips? did you make your x pipe? should i go with a h or x?? help me out here man! lol

I don't have any sound clips. I use to have some from the track but can't seem to find them. I love my exhaust sound, nice and deep, not too loud until you get on it. I have 2 magnaflow 5x11x22" muffler to help quiet it down.

I believe my exhaust guy made his own x-pipe. x or h would work fine, use which ever you can fit easier.

 

[AtomicHoe094]

would you guys recommend magna over flowmasters? any other decent muffelr companies? i heard bad reviews on flowmasters, but they sound really good on these trucks. lol i tried looking up on youtube, but nothing to exciting hit me there. how about these>
http://www.magnaflow.com/02product/displayapplications.asp?partnumber=11376

 

[blackcoffee]

LT headers / X Pipe / Open Exhaust =D

 

[foreverfalcon40]

Keep your EGR or kiss your MPG away. In some cases people even hae loss of power.

 

[AtomicHoe094]

i thought for the tbi's, you didnt have to do any egr work, it was only for the vortects and shit. I just put in a new egr not to long ago anywho. The o2 sensor bumg is already welded inthere, so ill use my stock one, its on the let side. I might grab a new 02 sensor tho before i put it up. ill throw some pics up tomorrow when it gets here. cant wait! im going to drive it around for a little just open headers

 

[AtomicHoe094]

pictures of the long tubes..

 

[foreverfalcon40]

I don't know how TBI are set up. I just know my truck.

A-Hoe...

When I went to the exhuast shop to get esitmates and conversate my vision of my exhuast and S/C set-up. I came across....

1. I can't run and X or H pipe bc my gas tank is on the drivers side towards the rear. Also....I say it agian and again FLOWMASTER sounds great but they either prohibit perofrmance or take away.

2. Since I couldn;t fit an X-Pipe, dynomax makes a muffler with an X-Pipe built into it.

Its called the Crosscer X.

Due to my HP goals...2.5" piping is all I need.

 

[AtomicHoe094]

thanks. In order to be at school and not with my truck, i need a picture of someones truck on a lift so i can draw this whole skit out. Im thinking of getting electric cutouts and magnaflow mufflers. My truck now is loud as shit with the factory exhaust, and just chopped. I need to quiet her down..

Anyone have an under body pic??

 

[blackcoffee]

Nope, no pics. Shit can't wait to take back my Shorties I got and get some ****** long tubes instead. BUT I'm gonna wait and have you send me a write up of everything you had to do to get these bitches in there.

 

[AtomicHoe094]

it should be all straight forward for these. it all depends what you have planned out for your exhaust exits. but ill be sure to do soo

 

[stykthyn]

any updates?

 

[AtomicHoe094]

umm to a certain extent. lol no progress due to me being at school 3 hrs away from my truck.. and im about to sell em :/ im thinkingg of a nbs motor swap tho