level kit block sizes

[STORMIN08]

so, i just grab a new level kit from a craigslist post for dirt cheap. it is billet, with grade 8 hardware.

my question is.....does any knoiw how thick of a spacer equals x amount of lift ?

i would really only like 1.5-1.75 inches of front lift....

i can machine it down it needed but was curious as to how thick i needed it.

 

[InTruckDesign]

They typically are a 2:1 ratio, so a 1/2inch spacer will yield 1inch of lift, 3/4inch=1.5inches..etc.

 

[STORMIN08]

good info. thanks.