EddieC
Full Access Member
- Joined
- Aug 9, 2014
- Posts
- 1,048
- Reaction score
- 873
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Just stitch it back together.What can I do about this seam separation/tear?
I'm not looking for a cosmetic repair as much as just to hold it together.
Just stitch it back together.
I hope I didn't sound sarcastic--I wasn't trying to be. I had an interior repair business and I did these kind of repairs all the time. It's a really simple repair--stitching it yourself.LOL, I understand the crazy look in your eyes now- that's 361 pages.
joe
You could try to glue a patch over the tears, as a non-permanent fix, and at the least cost.
If you want it done permanently, I suggest removing the seat cover and take it to a local tack shop, and have them perform the repair.
Or, simply replace it with a new one from The Seat Shop.
I have not found a cover with the chestnut infill panels and I don't want to lose that. I've never seen another like it.You could try to glue a patch over the tears, as a non-permanent fix, and at the least cost.
If you want it done permanently, I suggest removing the seat cover and take it to a local tack shop, and have them perform the repair.
Or, simply replace it with a new one from The Seat Shop.
I'd be afraid that the inner edge (away from the seam) may not have the strength to hold up to the stitching. There doesn't seem to be ample material to double over to reinforce that side of the seam.Just stitch it back together.
I don't recall seeing any 2 tone seats in any of these trucks. I remember the Tahoe Limited had 2 tone leather back in '99-'00.I have not found a cover with the chestnut infill panels and I don't want to lose that. I've never seen another like it.
I once found an oem part number for the cover but the list price was like a set of tires.
The seat shop doesn't have that.
A professional could replace the 1 piece that’s torn with a new piece of leather. That wouldn't be a big deal, but you'd have to leave the truck there--unless you pulled the cover off yourself--or the entire seat. Imo, that would be the best way to do it.The rear seat is in the basement, still new. Perhaps i could be a donor for a professional repair.
Not a special edition truck but a rather standard 2008 Z71. The Morocco Brown (not chestnut) and Ebony seats and door panels were an order option for certain exterior color(s), as far as I remember only the Silver Birch but perhaps a few others The silver was not my favorite exterior color choice but I had to have that leather color to make it unique. I found the color code on the build sheet to be #223.I don't recall seeing any 2 tone seats in any of these trucks. I remember the Tahoe Limited had 2 tone leather back in '99-'00.
Is you truck some kind of special edition, like a Remington edition or something?
Interesting... the more you know... lolNot a special edition truck but a rather standard 2008 Z71. The chestnut and black seats and door panels were an order option for certain exterior color(s), as far as I remember only the Silver Birch but perhaps a few others The silver was not my favorite exterior color choice but I had to have that leather color to make it unique.
Right, the more I know the farther away I end up. I stand corrected in that it is Morocco Brown/Ebony. Build code 223 on the vehicle.Interesting... the more you know... lol
Certainly a lovely color choice on those seats and doors, I get it.Not a special edition truck but a rather standard 2008 Z71. The Morocco Brown (not chestnut) and Ebony seats and door panels were an order option for certain exterior color(s), as far as I remember only the Silver Birch but perhaps a few others The silver was not my favorite exterior color choice but I had to have that leather color to make it unique. I found the color code on the build sheet to be #223.
What type of thread is applicable for that?Just stitch it back together.
I used heavy duty thread--not fishing line like some people use. I used a curved upholstery needle too.What type of thread is applicable for that?