HOW TO: Convert to Escalade LED Tail Lights

[riggz]

Anyone have an issue with low voltage by using this method? I have built my own using a Hopkins 5 to 4 trailer converter. If the vehicle is not running and brake is applied, the leds have sort of strobe effect. If the vehicle is running then the voltage is high enough to make the leds light up correctly. When using the hazards or turn signals they sometimes will strobe for a couple of flashes then operate normally. I've researched a bit discovered that the way most trailer brake converters operate a side effect is lower voltage output.

I am currently building my own 5 to 4 converter. It will have plugs on both ends that match the tahoe/suburban and the escalade plugs so cutting the original harnesses is not necessary.

 

[blkonblk]

Anyone have an issue with low voltage by using this method? I have built my own using a Hopkins 5 to 4 trailer converter. If the vehicle is not running and brake is applied, the leds have sort of strobe effect. If the vehicle is running then the voltage is high enough to make the leds light up correctly. When using the hazards or turn signals they sometimes will strobe for a couple of flashes then operate normally. I've researched a bit discovered that the way most trailer brake converters operate a side effect is lower voltage output.

I am currently building my own 5 to 4 converter. It will have plugs on both ends that match the tahoe/suburban and the escalade plugs so cutting the original harnesses is not necessary.

i see that on my lights, never knew what it was. thanks

 

[riggz]

Ah ok, just wanted to make sure I wasn't the only one. Hopefully the one I build will not have this voltage issue. Parts should be here by the weekend.

 

[blkonblk]

Did you ever get to make that harness? Now the hazard lights don't even turn on on the taillights


Sent from my iPad using Tapatalk

 

[THE YETI]

Did you ever get to make that harness? Now the hazard lights don't even turn on on the taillights


Sent from my iPad using Tapatalk

Huh?

 

[blkonblk]

I should of quoted riggz, question was directed towards him. Is anyone else having trouble with these Hopkins converters?? I'm on my second set

Sent from my SGH-M919 using Tapatalk

 

[THE YETI]

I should of quoted riggz, question was directed towards him. Is anyone else having trouble with these Hopkins converters?? I'm on my second set

Sent from my SGH-M919 using Tapatalk

Haven't had any issues on any of the harnesses I've done. Well, one fried resistor. No issues with the Hopkins tho.

 

[levannhood2007]

Wire harness

Im trying to get this wire harness also....how can i order one??

 

[blkonblk]

Haven't had any issues on any of the harnesses I've done. Well, one fried resistor. No issues with the Hopkins tho.

Where do you mount the Hopkins? I don't know if the rain is getting to them or what but I'm on my second day set of Hopkins and now having problems again

---------- Post added at 01:15 PM ---------- Previous post was at 01:14 PM ----------

Im trying to get this wire harness also....how can i order one??

YETI makes them, shoot him a pm

 

[THE YETI]

They are meant for the outdoor elements. But the harnesses I build have them hanging underneath by the harness on the rear bumper bar.

 

[BlackOh7on22s]

You still making these by chance?

 

[THE YETI]

Yes. Pricing is in the first post.

 

[css49017]

I want to do this plus the upper long led bar, this looks awesome!

 

[08burban]

Do you have any pics of V3 harness?

 

[THE YETI]

On my Instagram @oempartsdirect

 

[08burban]

Can you send me the The instructions in the parts I need to make v3 harness

 

[THE YETI]

Can you send me the The instructions in the parts I need to make v3 harness

Same parts and instructions on the first post. I just mounted the resistors differently.

 

[08burban]

Did you mount the resisters on top of the Hopkins harness?

 

[THE YETI]

Did you mount the resisters on top of the Hopkins harness?

Yep. But the resistors don't actually touch the harness.

 

[08burban]

What did you use in between the harness and the resistors ? I went on vleds.com and they have 2 different blue resistors one is a load equalizer resistor and the other one 5 OHM 50W resistor. Which one do you use?