Gauges not working, and service tpms and park assist + key fobs not working

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Kyle187

TYF Newbie
Joined
May 5, 2019
Posts
9
Reaction score
2
07 yukon xl slt, 5.3

The key fobs stopped working.

Then the gauges work intermittenly for a bit after starting ( read correct then drop down to 0 as if the vehicle was off, then back up and back down) and then they will work normally after a few minutes (including speedometer and tachometer)

also Im getting all warning lights on until the gauges start to work normally then all go away except for service tire pressure monitor system, and service parking assist.


this all happened at once. What the heck is going on here?
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
30,990
Reaction score
45,159
Location
Central Jersey
07 yukon xl slt, 5.3

The key fobs stopped working.

Then the gauges work intermittenly for a bit after starting ( read correct then drop down to 0 as if the vehicle was off, then back up and back down) and then they will work normally after a few minutes (including speedometer and tachometer)

also Im getting all warning lights on until the gauges start to work normally then all go away except for service tire pressure monitor system, and service parking assist.


this all happened at once. What the heck is going on here?
Have you tested the battery? Sounds like the battery might've bit the dust.
 

CaptainAmerica1

Full Access Member
Joined
Jun 14, 2020
Posts
879
Reaction score
1,393
Location
Arlington TX
Connections issues for sure. Bad ground? Connector under the dash to the instrument cluster loose? Battery cables? Starter cable? Ignition switch? Start going over it with a fine toothed comb…
 

Forum statistics

Threads
129,195
Posts
1,811,967
Members
92,297
Latest member
btheboyscout

Latest posts

Top