Figured out my next project :(

[EfiniMotorsport]

I had to get the outdrives for my boat sandblasted (a whole other project) and figured I'd have the blaster clean up a few spots on my truck while he was there. I had some rust on both rockers under the rear doors and a few spots above the drive rear wheel well. The driver rocker and wheel well ended up with a few pin holes but this is what the passenger side rocker looked like. I coated it with POR-15 until I can get to it later in the summer. Not looking forward to this project. I may start cleaning and coating the undercarriage over the summer too.I already replaced the brake lines with stainless but it's not pretty under there.