Easy lift

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Billy_ocean04

Full Access Member
Joined
Jan 9, 2010
Posts
77
Reaction score
0
Location
Michigan
I have a 99 tahoe and I was thinking about lifting it. I just want an inch or two. Maybe two. I still want to fit into those enclose parking garages. What's a good way to lift it with out spacers? What are all the parts I would need. Any advice is appreciated
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
99
Location
Near Philly
truck specs? OBS: crank the bars up a little and put a zero rate or two inch block out back and you are set...longer shocks would be a good idea too and an alignment
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
99
Location
Near Philly
sure, 1-2" longer than stock. Keep in mind, shocks do not lift the truck. A block between the leaf springs and cranking the torsion bars up is where the height comes from.
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
99
Location
Near Philly
it's an easy task. Feel free to post up more questions but like I said it is pretty straight forward if you've got some tools and a jack.
 
Top