D-Pillar speaker wiring for aftermarket amp.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jaden Bright

TYF Newbie
Joined
Nov 8, 2020
Posts
1
Reaction score
0
I have an aftermarket head unit currently running aftermarket door speakers. I just bought a Taramps 4 channel amp and I’m planning to install along with new kicker 3.5s in the d pillar, I noticed that neither the front door tweeters or d pillar speakers are currently powered. Which wire on the factory amp would I need to splice to power the D-Pillar speakers. The wire that comes out of the pillar to power the driver side harness appears to be pink-ish and green with a black stripe (colors may be wrong/faded) any help or questions are appreciated, thanks. These are currently the charts/ images I have. Vehicle is a 2000 GMC Yukon with the 9 speaker NON-BOSE sound system. Factory amp is located behind glovebox and has the cargo area subwoofer
 

Attachments

  • 166CAA2F-C297-4C57-95DB-D5CD88863695.jpeg
    166CAA2F-C297-4C57-95DB-D5CD88863695.jpeg
    211.8 KB · Views: 58
  • 02AE9F78-98CB-45FF-A9BB-8F9C5F5743D3.jpeg
    02AE9F78-98CB-45FF-A9BB-8F9C5F5743D3.jpeg
    217.2 KB · Views: 56
  • 83036858-5D01-4243-B0E6-7699B003C7DC.jpeg
    83036858-5D01-4243-B0E6-7699B003C7DC.jpeg
    348.8 KB · Views: 55

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
6,386
Reaction score
8,312
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

I cannot personally help you with your question; however, other members on this Forum that are much more knowledgeable than me will chime in.
 
Top