Custom Tune- No Crank No Start

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dantheman-2003

Full Access Member
Joined
Jan 3, 2022
Posts
151
Reaction score
149
Location
Placerville, Ca
Looking for some help. Recently installed a custom tune on my GMC 2009. Everything was working great, then I went to reflash because they sent me some updated tune files, and everything uploaded ok, but now no crank no start. Battery good, fuses good. Disconnected battery, tried to re-flash and nothing. When I turn the key on I have dash lights, headlights everything.... I jump it at the fuse box and it cranks over just fine. But not at the ignition. Almost as if the start authorization is blocking something. Also StabiliTrak light is on.

My only hope would be to take it to GM and have them reflash it to the original stock tune. Any advice?

Thanks,
Dan
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
31,354
Reaction score
49,875
Location
Stockton, Ca.
Is the security light on? With the key in run position?, note it will turn on for a few moments when the key is turned to run then goes out if not then it needs a relearn
 

Marky Dissod

Full Access Member
Joined
Mar 3, 2023
Posts
4,604
Reaction score
6,712
Location
(718)-
My only hope would be to take it to GM and have them reflash it to the original stock tune. Any advice?
0th: Whatever you do, NOT THAT. Do NOT take it to GM - else, why bother getting a tune in the first place?
Whole point of an aftermarket tune, is to NOT settle for GM's 'everyone gets the burger the way we make it including you, and don't ask what we put in it!' tune.
That's NOT what you want to go back to.
OK
1st: Your 1st hope should be to go back to the tuner and have them correct the previous update. To be clear, the problem is the previous update.
... they sent me some updated tune files, and everything uploaded ok, but now no crank no start.
Next step is THEY send you more updated tune files, everything uploads ok, crank start drive bier.

I state the above AS THE TUNER who made the mistake of providing the client a tune that failed to start his RoadMaster.
Best believe I paid for his express shipping label, corrected my error in his tune, and express shipped the pcm back to him;
that's what he was OWED, I gave him what I OWED him. He paid me to improve his RoadMaster, not to stop it from starting.
All he had to do was tell me so.

You are OWED. Go tell your tuner so.
OR ...
2nd: are you saying that your only hope is GM, because your tuner ghosted you?

3rd: you haven't named your 'tuner'. Why?
 
OP
OP
Dantheman-2003

Dantheman-2003

Full Access Member
Joined
Jan 3, 2022
Posts
151
Reaction score
149
Location
Placerville, Ca
0th: Whatever you do, NOT THAT. Do NOT take it to GM - else, why bother getting a tune in the first place?
Whole point of an aftermarket tune, is to NOT settle for GM's 'everyone gets the burger the way we make it including you, and don't ask what we put in it!' tune.
That's NOT what you want to go back to.
OK
1st: Your 1st hope should be to go back to the tuner and have them correct the previous update. To be clear, the problem is the previous update.Next step is THEY send you more updated tune files, everything uploads ok, crank start drive bier.

I state the above AS THE TUNER who made the mistake of providing the client a tune that failed to start his RoadMaster.
Best believe I paid for his express shipping label, corrected my error in his tune, and express shipped the pcm back to him;
that's what he was OWED, I gave him what I OWED him. He paid me to improve his RoadMaster, not to stop it from starting.
All he had to do was tell me so.

You are OWED. Go tell your tuner so.
OR ...
2nd: are you saying that your only hope is GM, because your tuner ghosted you?

3rd: you haven't named your 'tuner'. Why?
All good points... and to be honest, I'm not getting the best response and cooperation from the Tuner. Didn't drop the name because I'm still working with them trying to see what my options are. Meanwhile, I need my truck. GM will reflash for full recovery back to the factory settings and I am confident that will get me back up and running, then I will deal with the tuner. That's my plan so far.

But I agree this is a direct correlation between the custom program and the no crank no start.

@Marky Dissod - What kind of tunning do you use? I'd be interested in hearing more. I love this truck and definitely want the upgrades.
 
OP
OP
Dantheman-2003

Dantheman-2003

Full Access Member
Joined
Jan 3, 2022
Posts
151
Reaction score
149
Location
Placerville, Ca
why not just load up the previous tune that was working?
I wish it was that simple. I need to perform a full program flash. I asked the Tuner to resend me the original stock tune file to see if I can install it back on there and start from scratch. Waiting to hear back from them.
 

randeez

Full Access Member
Joined
Sep 29, 2017
Posts
9,046
Reaction score
29,119
Location
south florida
why dont you have it? it sounds like youre doing remote tuning, so if you were the one to originally read the tune from the truck it should be saved somewhere on your hard drive or in your sent email

lets start at the beginning -
what are you flashing tunes with? hptuners, efilive, diablo

do you have a root tool or are you using a flashing tool tied to the tuner autocal(efilive) or RTD(hptuners)
 
OP
OP
Dantheman-2003

Dantheman-2003

Full Access Member
Joined
Jan 3, 2022
Posts
151
Reaction score
149
Location
Placerville, Ca
why dont you have it? it sounds like youre doing remote tuning, so if you were the one to originally read the tune from the truck it should be saved somewhere on your hard drive or in your sent email

lets start at the beginning -
what are you flashing tunes with? hptuners, efilive, diablo

do you have a root tool or are you using a flashing tool tied to the tuner autocal(efilive) or RTD(hptuners)
I am using the AutoCal EFILive. The original copy I have of E38_0013.ctz is giving EFILive a “faulty checksum” warning, so I have not attempted to flash it. Also waiting to hear back from the Tuner if I can perform a full program reset with this file.
 

Forum statistics

Threads
138,785
Posts
2,017,003
Members
102,438
Latest member
alexblagoev

Latest posts

Back
Top