Was trying to see if anybody had tried this and knows if it'll work or not. Trying to do a somewhat cheap exhaust.
I read the stock exhaust is 2.75 od. Could i slide a 3 inch muffler over it and clamp it down? Im unable get the the inside od of the muffler but just Curios has anybody else tried it and did it oval the muffler inlet instead of clamping since it may be about a 1/8 or so gap.
Plan is to cut the exhaust and run the flowmaster 71419 muffler with a turn down before the axle. Trying to get a nice sound out of the 03 tahoe i just got on a budget.
I read the stock exhaust is 2.75 od. Could i slide a 3 inch muffler over it and clamp it down? Im unable get the the inside od of the muffler but just Curios has anybody else tried it and did it oval the muffler inlet instead of clamping since it may be about a 1/8 or so gap.
Plan is to cut the exhaust and run the flowmaster 71419 muffler with a turn down before the axle. Trying to get a nice sound out of the 03 tahoe i just got on a budget.