Cam Motion Stage 2 cam for 6.2?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Geotrash

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
5,494
Reaction score
12,982
Location
Richmond, VA
I just thought to look for an emailed receipt.

28-12713265-16 - GM High Performance LS .550"
Lift Springs, Set of 16

So I'd have to go with the low lift if I'm not confused. It sounds like I'd still get a large bump in low end torque vs the LS9 cam I put in.
Right on both counts. Or, since changing out the valve springs is a pretty easy job, you could also look at the BTR springs because they’re good to .560
 

PatDTN

Full Access Member
Joined
Jul 5, 2016
Posts
583
Reaction score
393
I'll watch your results with the high lift version before I decide. :cool:
 
OP
OP
Geotrash

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
5,494
Reaction score
12,982
Location
Richmond, VA
I'll watch your results with the high lift version before I decide. :cool:
I’m betting that the performance will be very close to the BTR stage 2 truck cam, with the exception that it will idle more smoothly. If so, I think I will be very happy with the performance. I’ll definitely post up the results in few weeks once the cam is in!
 

Forum statistics

Threads
128,801
Posts
1,805,623
Members
91,784
Latest member
navyboy14094
Top