Add 4wd harness

[Th8nos]

I've went a different route with the engine on my 2dr Tahoe/ Esky swap. I'm running a 5.3 out of an 03 Yukon and mating it to the 4l60 4wd from my 00 escalade. I have the ecm and my harness is an aftermarket stand alone. My question is; how can I tie in my 4wd wiring to the new stand alone? I'm kinda stumped and need a little push because I took the training wheels off too quick

 

[rockola1971]

I've went a different route with the engine on my 2dr Tahoe/ Esky swap. I'm running a 5.3 out of an 03 Yukon and mating it to the 4l60 4wd from my 00 escalade. I have the ecm and my harness is an aftermarket stand alone. My question is; how can I tie in my 4wd wiring to the new stand alone? I'm kinda stumped and need a little push because I took the training wheels off too quick

Holy piece together Batman! If i understood correctly you have 4L60E and a Tcase from a 2000 esky but im not quite sure what you are putting it into but here is the schematic for the 00 Tcase electrical control needs.

 

[Th8nos]

Thnks . Its going in my 2dr hoe. I did have the 5.7 in it but my buddy gave me a sweet deal on the 5.3 and ecm.

Holy piece together Batman! If i understood correctly you have 4L60E and a Tcase from a 2000 esky but im not quite sure what you are putting it into but here is the schematic for the 00 Tcase electrical control needs.

 

[swathdiver]

The chassis for the RWD and 4WD are different. I've been told that the front suspension is different too on those 800s.