2021 Yukon Camera Install

[jedilord]

Finally installed my camera today. To my surprise the fuse bank is on the passenger side and I was able to find 12v that turns off when the car is off. You want to use fuse F26 as shown in the picture below. I used a 12v to 5v USB converter (see link) to get the correct voltage for my camera and used a 12ft micro-USB to USB cord (although you probably only need 8ft-ish).

eoocvt DC Converter Buck Module... https://www.amazon.com/dp/B07JHH294R?ref=ppx_pop_mob_ap_share

 

[MrBiggs]

Finally installed my camera today. To my surprise the fuse bank is on the passenger side and I was able to find 12v that turns off when the car is off. You want to use fuse F26 as shown in the picture below. I used a 12v to 5v USB converter (see link) to get the correct voltage for my camera and used a 12ft micro-USB to USB cord (although you probably only need 8ft-ish).

eoocvt DC Converter Buck Module... https://www.amazon.com/dp/B07JHH294R?ref=ppx_pop_mob_ap_share




View attachment 271268

This is great info. I’ve been looking for info like this for a bit. Thanks for sharing!!!