2012 burb shifter

[Bronson357]

OK so new to me burb i can't get the shifter to m, shifter works fine in every other position. Is there something I'm missing??

 

[PG01]

Pull it towards you and down?

 

[Bronson357]

Have not tried pulling towards me past d
Thanks

 

[Fless]

Pull it towards you and down?

Like selecting 1st gear on a three-on-the-tree.

 

[Bronson357]

I did and nothing? Any ideas?

 

[Bronson357]

It definitely shifts in to all gears fine,you can feel the clicks as they engage, you can pull back just doesn't quite "drop" into M
Thanks

 

[Bronson357]

Anyone know what I may need to do? It shift fine into all gears except,m ,new shift arm? Seems the cable is correct,since all positions line up. Is there a possibility of a relay or fuse causing this? I definitely feel all detents in the shifter and really no slop.
Any ides and thanks

 

[swathdiver]

Anyone know what I may need to do? It shift fine into all gears except,m ,new shift arm? Seems the cable is correct,since all positions line up. Is there a possibility of a relay or fuse causing this? I definitely feel all detents in the shifter and really no slop.
Any ides and thanks

If you crawl under the car, can you manually shift it to "M"? Don't forget to set the parking brake and chalk the wheels so you don't get run over.

If you can, you may have a cable problem. If you cannot, you may have an internal problem with the shifter inside the transmission.

 

[Bronson357]

Thank

 

[Fless]

Don't forget to set the parking brake and chalk the wheels so you don't get run over.

Chock, my friend! Chock!

 

[swathdiver]

Chock, my friend! Chock!

I was looking at that and didn't think it looked right! Thanks! LOL

 

[Bronson357]

Ok so a little more seat time, it will go to m but I have to pull down fairly hard , kinda slam it. Is this normal or is something else going on?
Thank you

 

[Bronson357]

Btt thanks

 

[mikez71]

Did you inspect shifter cable bushing end on transmission?

While you're down there, you can try what @swathdiver suggested in post #8.

 

[Bronson357]

Nope probably have 1hr of seat time, all gears shift proper, just m is hard to get. Where is the adjustment? Thanks much