2011 Tahoe LTZ Z55 Suspension Options

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GS Audio

TYF Newbie
Joined
Jul 31, 2026
Posts
5
Reaction score
2
New member, first thread. I've been searching, but haven't found an answer so apologies if any of this is repetitive.

I have a 2011 Tahoe LTZ with Z55 suspension. Super clean truck purchased from original owner @ 150k miles. I'm the second owner and now sitting at around 155k. I knew it needed a suspension refresh when I bought it and negotiated (not enough) into the sale price.

After reading various threads, I'm definitely keeping the stock Z55 setup. I've got a parts list running from RockAuto, however wondering if there are options for the front and rear shocks that are a bit friendlier on the wallet than genuine GM.

Front is the electronic shocks (not sure if Magnaride as I do not have Z95 RPO code, however do have a plug on them). Rears are the air shocks. I'll also be needing a new compressor as that is non-operational.

My dilemma up front is $300/strut, and also needing new springs as 15 years of northeast winters have beaten them up. That also means $150 each for new strut mounts. Springs only option appears to be the Moog 81252. All in, looking at like $1050 roughly just on the front.

Rear air shocks are around $250 each, plus the compressor (thinking the Dorman one as can get for around $200), total coming to around $700ish.

As you can see, $1700 before any taxes, shipping, and labor (for front, rears I can do myself) is alot.

I have been watching this ebay kit which seems to be a decent match, however its ebay and awfully cheap......soooo, possibly wasted money unless someone has tried these out already.


Hoping some of the experts on here can share their knowledge and any options possibly available. Love the truck and want to keep it well-maintained, but hoping there's a mutually friendly middle-ground when it comes to parts prices.

Thanks in advance for you feedback/help!
 

Fless

Staff member
Moderator
Joined
Apr 2, 2017
Posts
17,495
Reaction score
36,476
Location
People's Republic of Colorado
The thread below is a bit dated but might interest you; be sure to read through it all:

 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,978
Reaction score
10,213
Location
NE. FL.
New member, first thread. I've been searching, but haven't found an answer so apologies if any of this is repetitive.

I have a 2011 Tahoe LTZ with Z55 suspension. Super clean truck purchased from original owner @ 150k miles. I'm the second owner and now sitting at around 155k. I knew it needed a suspension refresh when I bought it and negotiated (not enough) into the sale price.

After reading various threads, I'm definitely keeping the stock Z55 setup. I've got a parts list running from RockAuto, however wondering if there are options for the front and rear shocks that are a bit friendlier on the wallet than genuine GM.

Front is the electronic shocks (not sure if Magnaride as I do not have Z95 RPO code, however do have a plug on them). Rears are the air shocks. I'll also be needing a new compressor as that is non-operational.

My dilemma up front is $300/strut, and also needing new springs as 15 years of northeast winters have beaten them up. That also means $150 each for new strut mounts. Springs only option appears to be the Moog 81252. All in, looking at like $1050 roughly just on the front.

Rear air shocks are around $250 each, plus the compressor (thinking the Dorman one as can get for around $200), total coming to around $700ish.

As you can see, $1700 before any taxes, shipping, and labor (for front, rears I can do myself) is alot.

I have been watching this ebay kit which seems to be a decent match, however its ebay and awfully cheap......soooo, possibly wasted money unless someone has tried these out already.


Hoping some of the experts on here can share their knowledge and any options possibly available. Love the truck and want to keep it well-maintained, but hoping there's a mutually friendly middle-ground when it comes to parts prices.

Thanks in advance for you feedback/help!
Z95 is Magnaride

Z55 is Autoride.

Since you Do Not have the Z95 RPO code that means you have the Autoride suspension.

All of the cheaper options are going to be passive struts/shocks, meaning they just have a resistor built into the strut/shock to trick the suspension module so you don't end up with messages in the DIC on your cluster.

If you want to maintain the electronic suspension your truck came with then you need to make sure whatever struts/shocks you buy say they are "Active" and not passive.
 

Joseph Garcia

Elite Member
Supporting Member
Joined
Aug 2, 2018
Posts
10,948
Reaction score
16,064
I've had both the stock Z55 suspension and an aftermarket passive suspension. IMO, the Z55 suspension is a far better option. In full transparency, other Forum members have converted to passive suspensions, and they are happy with them.

If you go with the Z55 suspension option, then check your RPO sticker for 3 RPO codes, and select your shocks accordingly to match those codes. Z55, 6**, 7**

Use Genuine GM OEM parts, except for the front springs (discontinued), which Moog will be a decent replacement. The Dorman compressor works well, though.

Remember, you get what you pay for, AT BEST.
 

petethepug

Michael
Joined
May 4, 2016
Posts
3,829
Reaction score
4,411
Location
SoCal
Rock Auto discount codes are your friend. 5% off can mean free shipping.

Post in thread 'Rock Auto Discount Codes - Post 'em Here for Others to Use'
https://www.tahoeyukonforum.com/thr...em-here-for-others-to-use.137722/post-2071846

Z55 is one of GM’s best riding suspension ever. Before CA used to shave their concrete highways, the z55 was the only cure to rid SUV of the seams between the concrete slabs that would rock you to sleep at 70mph.
 
OP
OP
G

GS Audio

TYF Newbie
Joined
Jul 31, 2026
Posts
5
Reaction score
2
Apologies for not responding sooner....work has been tough!!

Yes, my RPO codes are Z55, 6H3, and 7H3.

Thank you for your responses. Yes, definitely sticking with the factory set up as I want to maintain comfort, not deal with by-pass resistors, and and keep an original setup.

I saw in another post from 2021 (guy in NY with my twin vehicle!!) that a member can run the vin to confirm exact P/N's. I only need this confirmed for the front struts, rear air shocks, rear springs, front bump stops (jounce), and front strut mounts. Here is that thread:


@915_Tahoe the last 8 of my VIN is BR213533. Appreciate your help if you can confirm the P/N's for the items in bold above.
 
OP
OP
G

GS Audio

TYF Newbie
Joined
Jul 31, 2026
Posts
5
Reaction score
2
I'm a bit impatient, so had my mechanic (big GM guy) double-check my P/N and have ordered all the front end pieces for a full strut rebuild.

All that's left to get are the rear air shocks and new compressor. Shocks I have confirmed GM 5801090, however open to any feedback on updated P/N's for those, as well as what everyone is using for a replacement compressor. Was leaning towards the Dorman unit, but if a cheaper option is just as good, please let me know!

Thanks!
 

Joseph Garcia

Elite Member
Supporting Member
Joined
Aug 2, 2018
Posts
10,948
Reaction score
16,064
I used a Dorman compressor, and it works fine. The only issue that I have with it (?) is that I cannot see the existing air pressure in the shocks, when I query with my Tech 2. Other folks have seen the air pressure with their Tech 2's and a GM compressor. I'm not saying that the Dorman compressor is the actual cause with any certainty, but that is my experience.
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,978
Reaction score
10,213
Location
NE. FL.
I used a Dorman compressor, and it works fine. The only issue that I have with it (?) is that I cannot see the existing air pressure in the shocks, when I query with my Tech 2. Other folks have seen the air pressure with their Tech 2's and a GM compressor. I'm not saying that the Dorman compressor is the actual cause with any certainty, but that is my experience.
I have/had a Dorman compressor on my Burb. The ones I have had last 2-3 years. The good thing is the Lifetime warranty.

I can see the pressure even with the Dorman compressor.
 
OP
OP
G

GS Audio

TYF Newbie
Joined
Jul 31, 2026
Posts
5
Reaction score
2
I went with the Dorman. Got for a great price, so couldn't pass it up. Hopefully I'll do the rear (myself) this week, then drop off at my mechanic to do the front. All parts on hand and hopefully I'll be enjoying a proper, Z55 functioning setup again very soon!
 
OP
OP
G

GS Audio

TYF Newbie
Joined
Jul 31, 2026
Posts
5
Reaction score
2
Just an update to semi-close out this topic.

Got lazy and dropped off the Tahoe this past Monday to have all the work done by the mechanic. Picked it up last night and am happy I stayed with the OE setup....ride is night and day. The old stuff removed was original (155k miles). Ride is finally back to acceptable and truck is pretty much in "new to me" condition.

Appreciate the feedback from those that posted. Biggest challenge on this refresh was the parts list thanks to the constant P/N changes by GM. As an FYI, I got the front struts for $159 each (using an older P/N). These efforts helped tremendously so I could do this work sooner than later.

Thank you!
 

Forum statistics

Threads
138,784
Posts
2,016,992
Members
102,438
Latest member
alexblagoev

Latest posts

Back
Top