Well, thought I was going to jump back in the rig and have a better ride and functioning rear leveling once I got done with the rear shock install tonight. Boy was I wrong, pump doesn't even kick on now like it did when I started it up to pull it in the garage this afternoon. Normally it will do it's kick on every time the rig starts, but didn't when I went to take it for a test ride. Dash lit up like I didn't want to see, ABS light, Traction Control, and the DIC is saying traction control and stabilitrack are off. I've done some searching, and I can't see how changing out the rear shocks, (I installed genuine AC Delco 580-1093,) should be causing any of this.
Any ideas of where to start and what to look for? Everything was working fine before I changed the shocks (other than the leveling bags leaking air, because the compressor WAS working.)
Used my FlashScan V2 to scan for DTCs, nothing set, nothing pending....
Any ideas of where to start and what to look for? Everything was working fine before I changed the shocks (other than the leveling bags leaking air, because the compressor WAS working.)
Used my FlashScan V2 to scan for DTCs, nothing set, nothing pending....
Last edited: