Oh ok. The IP courtesy light is the one under the dash.
I couldn’t find a diagram for a two-door, but it looks like it should have an orange and white to the connector at the bulb. Connector C215 is accessible, pull the pillar trim (under the blower) and the connectors are tucked in there. Best guess…check for continuity across the orange and white on the door side of C215 with a known good bulb installed. If it’s bad, then you know that the issue is between that connector and the bulb.
Also check for voltage on the chassis side of the connector.
It looks (for a 4-door at least) that if one works, they all would.
If your door hinge pins were recently done (and the door removed), it could be that the connector wasn’t reconnected.