'08 Tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
5,482
Reaction score
12,964
Location
Richmond, VA
Does this sound stupid? Remove the oil pressure sensor and the screen and then start the Tahoe to eject any gunk that might be living under the oil pressure sensor?
Not a good idea in my opinion. Besides making a huge mess, all of the oil for the engine flows through that gallery before it gets to the cam and bottom end bearings.
 
Last edited:
OP
OP
I

irishrob82

TYF Newbie
Joined
Feb 12, 2011
Posts
14
Reaction score
9
Problem was a lot worse then I thought... It was oil pump because the motor seized up on me this weekend. And there was no oil in any of the other cylinders upon inspection but plenty of oil in the pan along with metal shavings :(
 
Top