Search results
-
TBSS intake on gen III 4.8 5.3 6.0
After more research (thanks to ya'awl helping me to ask Google the right thing) yes the vett filter is when it's a return fuel type on our trucks (99-03) and nnbs is confusing IMHO, instead just say gen IV LS engines with cathedral port heads. So it's most trucks/suv's. Only L76 engines had car...- MSU BullDAWGz
- Post #7
- Forum: Performance
-
TBSS intake on gen III 4.8 5.3 6.0
Couple of questions. Is that truck intake on all models or only SS, is it on only 6.2 or 5.3s or what? Is the vett fuel filter for return type systems (99-03) or when like my 2005 L59 flex fuel suburban? Which is return-less.- MSU BullDAWGz
- Post #4
- Forum: Performance
-
Mandatory Onstar?
But what I'm saying is there are many things on these vehicles that we don't want. Someone in Alaska might not need A/C and me living way down South, I sure don't need heated seats and mirrors. But many options we may want come bundled in with options we don't need or want. But if we want the in...- MSU BullDAWGz
- Post #66
- Forum: Audio & Electronics
-
Mandatory Onstar?
Not mad at all, and I definitely didn't want to turn this into a thread about safety devices on GM vehicles. I just wanted to give some of the thousands of things either added to or never used in the making of these vehicles. Another example of both safety and cost is did GM ever ask us if we...- MSU BullDAWGz
- Post #64
- Forum: Audio & Electronics
-
Mandatory Onstar?
Did you even read all what I said? I said on things like a highway where speeds would be faster and forces stronger than people could overcome I said yes you need seatbelts. But what about slow speeds? Off angle 4 wheeling. I've seen 4x4 rollovers where people died because of seatbelts keeping...- MSU BullDAWGz
- Post #62
- Forum: Audio & Electronics
-
Mandatory Onstar?
Back in the 60's they added seatbelts. Did YOU ask for them? That added cost to the vehicles. So did safety glass in all the windows. What about radial tires? They were optional but then became mandatory. Did YOU ask for that? I mean come on, they could put a solid front axle back on all 4x4s as...- MSU BullDAWGz
- Post #60
- Forum: Audio & Electronics
-
TBSS intake on gen III 4.8 5.3 6.0
Richard Holdener has done LS engine dyno comparative testing with stock truck, tbss & the LS6 intakes. He compared the Trailblazer intake to both the stock, cathedral port truck intake, and the LS6 Corvette intake. The truck intakes were designed to enhance low-speed power in the rpm range where...- MSU BullDAWGz
- Thread
- Replies: 43
- Forum: Performance
-
Worst shipping ever. Almost everything I receive has Zero packaging and gets damaged.
To the OP, I plea the 5th. With that said, I've "heard" (evil grin) some people that missed the warranty or return/damaged date have ordered the exact same part and then put said damaged compressor back in the box and returned it and told RA (or whoever) item was damaged and I got a replacement...- MSU BullDAWGz
- Post #33
- Forum: RockAuto
-
24x14 Offroad Wheels On An AT4
"If the rocks and gravel don't get me, the haters with their keys or sharp objects will." Well you could always do like me and after some haters scratch the paint, just go muddin n leave some gumbo mud on it. Then the scratches and dings are like war scars n u got a story to tell... LOL- MSU BullDAWGz
- Post #108
- Forum: Exterior
-
24x14 Offroad Wheels On An AT4
Love the wide track look. I personally like the idea of a street legal trophy truck hybrid. Back in the day, leaving stock to small lift and putting huge tires with bolt on cut out fender flares were the thing here back in the 80's - 90's. My '85 K20 has 1 ton hd towing package so I only had to...- MSU BullDAWGz
- Post #107
- Forum: Exterior
-
Locker VS Posi
On my ole K20 I have a Detroit Locker in the 14 bolt rear and a possi up front. The old Detroit is probably older than half the people on this forum and still works great. Ratchets when I make sharp turns. Only minor issues in rain, but to be honest I grew up on dirt roads. Learned to drive on a...- MSU BullDAWGz
- Post #55
- Forum: Performance
-
How much lift for 33's
Where is it rubbing? Is it hitting the front bumper? After doing more research from many other forums I read that 33's should fit without a lift or just a little added using the factory keys just torqued a little. I'm going to try n see. If needed I'll add some lift. Most cases of rub was at the...- MSU BullDAWGz
- Post #3
- Forum: Lifted Supension - Z71 & 4x4
-
Anyone in the South Alabama/Mississippi/Panhandle area?
Near Hattiesburg MS here.- MSU BullDAWGz
- Post #20
- Forum: Southeast
-
New Here
Gotta ask, your name? Are you referring to a Remington 1906 shotgun? And welcome btw...- MSU BullDAWGz
- Post #7
- Forum: Introduction
-
Suthurn hospitality
The swordfish was a fast attack sub in WW II. They cut it in half and added the nuclear power plant and missile silos.- MSU BullDAWGz
- Post #8
- Forum: Introduction
-
-
Suthurn hospitality
I was on USS Swordfish a boomer sub. I drive an 05 Suburban LT 4x4, my play toy is an 84 K20 w/ 383 sb, 14 bolt rear w/ detroit locker, 10 bolt w/ possi up front, 1ton brakes & suspension + 2” lift front & rear to fit 37" boggers. And planning to build either a 5.3 or 6.0 LS turbo'ed to up the...- MSU BullDAWGz
- Post #3
- Forum: Introduction
-
How much lift for 33's
I've got a '05 Suburban 1500 LT w/ the L59 (vin Z) 5.3L flex fuel. She came with 265/70R 17's from the factory. Which are 31.7" I want to put on 285/70R 17's or 33 x 10-12" x 17". Note: the 285's are a hair in under 33" also. So my question is do I need to lift my Suburban? If yes then how...- MSU BullDAWGz
- Thread
- Replies: 11
- Forum: Lifted Supension - Z71 & 4x4
-
Cv axle issues on lifted tahoe
As the others have said, angles at 6"+ is TOO much. You either need to lower the torsion bars or drop the differential and the rack and pinion as your tie rods are also at bad angles. Anything over 2-3" and the whole front end geometry is thrown all outta wack. Don't get me wrong, many do it but...- MSU BullDAWGz
- Post #15
- Forum: Lifted Supension - Z71 & 4x4
-
Torsion Key - Ford OEM Vs Ford Level
I can't answer about the ford key's but I've used the "Rough County" 2" leveling key and cranked it to almost 6” over stock but I didn't need all that. It also put cv's at a bad angle so I dropped it to 3-4" so my 33's could fit in my then new 99 Silverado. I also added a leaf to rear for +2"...- MSU BullDAWGz
- Post #2
- Forum: Lifted Supension - Z71 & 4x4
-
new here
Welcome and nice looking LT 4wd. I've got an 05 LT 4x4 Suburban 1500 in the process of upgrading it. Adding a torquer cam, tbss intake, LS6 springs, shorty headers w/ true dual exhaust, 2-3” lift for some 33" TSL Super Swampers.- MSU BullDAWGz
- Post #11
- Forum: Introduction
-
Suthurn hospitality
Hey ya'awl, I'm here to teach/help when I can, ask questions when I can't. N have a good ole time doin either. Just so ya'awl knowz I can spell n speak proper anglish whenz I wanna. As suthurn is my first language but I also speak English, Italian and Spanish. I also speak many other languages...- MSU BullDAWGz
- Thread
- Replies: 7
- Forum: Introduction
-
Greetings from New Orleans
Howdy from a Mississippi kid (53 yr old kid but I luv that skynyrd song) I'm just n hour from Nah-Orlenz (that's the correct pronunciation for y'all yankees). Used to live on west bank in Westwego/Marrero area back in the late 80's early 90's. Welcome n have a safe trip btw. Geoux DAWGz.... LOL...- MSU BullDAWGz
- Post #12
- Forum: Introduction
