Search results

  1. kly5953

    memory seat with a mind of its own

    Could you elaborate on that? Calibration? I figure the calibration happens when I set the seat memory options, or are you talking about something else?
  2. kly5953

    memory seat with a mind of its own

    I have a 2004 tahoe, and for some reason, almost every time we start the vehicle our memory settings are gone, and the seat moves into random positions. It's getting quite annoying and I don't really know where to start. It works for a day, and then I hop in and it shoves me into the steering...
  3. kly5953

    Passenger Floorboard leak not dexcool

    Thanks guys, I haven't put any silicon lube on the tracks but other than that I have cleaned out all the leavs under hood and the sunroof areas. I tried to keep all that clean from the date of purchase since it already had 165k on it. Now that I'm at 208k I need to start looking at keeping up...
  4. kly5953

    Passenger Floorboard leak not dexcool

    I chased this down a few times, but the issue never came back. We have had awful storms, and I have tried recreating the issue, but it will not come back. I have no clue what caused it, I'm glad it hasn't happened again. I almost wonder if the drip may have come from condensation buildup behind...
  5. kly5953

    Passenger Floorboard leak not dexcool

    I have a 2004 tahoe LT 2wd 5.3 After completing work on the vehicle Sunday, we had 2 days of no issues but during a heavy rain yesterday in GA, I found the floorboard on the passenger side to be soaked. You could trace where the leak is landing and it seems to be coming from directly under the...
  6. kly5953

    rear seat entertainment

    Has anybody upgraded the RSE? I love having the unit but I wonder if there is a way to swap it out with the newer BluRay models? We have a lot of bluray movies now and it'd be nice to swap it out to something different. Maybe this has been discussed but search didn't help me find what I was...
  7. kly5953

    Stepper motor replaced, Speedo still not working

    Ok, I went ahead and replaced the speed sensor, as it's hard not to justify the 3 min of work and $11 part, but it's still not working. Reminder: everything else on the dash is good. Does anybody know exactly what all I need to look at when I pull the board out of the dash? It seems as if some...
  8. kly5953

    Stepper motor replaced, Speedo still not working

    what is the name of the sensor that I'm looking for? The handheld I have has weird names for everything and I don't see a straight "speedometer sensor" label anywhere.
  9. kly5953

    Stepper motor replaced, Speedo still not working

    Every other issue has been fixed water pump, MAF, Alt, serpentine belt, AC belt, washer reservoir, washer motor. I am somewhat new to trouble shooting vehicles, and hoping that I can find the issue. I will say: I need a new oil pan gasket, as this one is obviously bad. Not sure if that can...
  10. kly5953

    Stepper motor replaced, Speedo still not working

    Is there anybody that has any input on this? Not having a speedometer is getting old. The speedo is now randomly reading over 120mph, then will just drop all the way to 0mph
  11. kly5953

    Stepper motor replaced, Speedo still not working

    I recently got a set of new bulbs and stepper motors to replace on my gauges. After swapping out the tach, it now works, and I swapped 2 different ones into the speedo, but the speedo is still acting weird. The first one jumped 10mph everytime I started the tahoe, and the second one never moved...
  12. kly5953

    P0101 P0171 P0174 help

    I had just ordered this from RA before you posted.
  13. kly5953

    P0101 P0171 P0174 help

    did not see a leak anywhere, I also tried the TB cleaner, didn't try water though....just don't have a spray bottle to use for it. If I put smoke in there, and no leaks...I'm guessing it's just the MAF I need to replace. Well as long as it gets me through this smog check.
  14. kly5953

    P0101 P0171 P0174 help

    Delphi, so it looks to be OEM. I need to do a smoke test then and see if I need to get intake manifold gaskets. My 0101 code came back but the 171 and 174 have not yet. I'll do a smoke test with a cigar in a few to check it. Standby
  15. kly5953

    P0101 P0171 P0174 help

    Sorry, I haven't been back on as i havent had to drive it too much and been busy. I have an OBD-II scanner, how would I do that?
  16. kly5953

    P0101 P0171 P0174 help

    Going ahead and starting the thread, couldn't find anyone with the same codes that completed their thread with an actual fix. P0101, P0171, P0174 all showed up Already cleaned MAF and TB then blew out a somewhat new looking air filter (not a K&N style reusable) Codes went away for about 4...
  17. kly5953

    Mode Door Actuator Replacement

    It looks like removing the console wouldn't really even help all that much. My problem is my hands are too big to fit in the location needed to put the socket on the screw. Plus there's a steel frame for the console that's still in the way once I get the plastic bits pulled off.
  18. kly5953

    Mode Door Actuator Replacement

    aaaaah, my kids are 2 and under....I need to find someone to help with that then. I will say this, I will not be putting that screw back in its place, the other two hold it up more than enough.
  19. kly5953

    Mode Door Actuator Replacement

    Ok, I gotta ask, how the hell do you get to the left screw under the passenger side when you have a center console? I spent about 20 minutes and was able to turn it 2.5 turns maybe, now I can’t get a socket on it at all
  20. kly5953

    TBSS Intake swap?

    Has anyone actually completed a dyno run before and after the TBSS intake swap? Just found that Rockauto sells the genuine GM part for 130$ so it looks like a darn easy and cheap performance mod to get me moving.....but, not sure how much TQ gain i could actually get down low
  21. kly5953

    Yes, it's an A/C post

    Anyone.....? Anyone? Bueller?
  22. kly5953

    All Weather floor mats

    I went on the Husky liner website, and it looks like they only have one unit for the 2nd or 3rd row. Did you just purchase that 2x and put one on each row? Or was there a specific unit you purchased for the 2nd row?
  23. kly5953

    Yes, it's an A/C post

    So how do I check if the actuator is the problem? Do I need that scanner, cause I can do it, just might be a week or so before I can get to it. And what is a good brand of blend door actuator? doorman? ACDelco?
  24. kly5953

    Yes, it's an A/C post

    So I did a reset of the AC again last night. While it went through a 2 minute cycle reset, it blew hot, cold, and medium air. This morning while I'm driving, it blew 74° air right off the bat, so we were good there, then I turned it down to 60° and it blew colder air, but when I turned it up to...
  25. kly5953

    Yes, it's an A/C post

    Well, just realized my unit didn't fully reset, so i'm going to retry that tonight

Forum statistics

Threads
129,174
Posts
1,811,644
Members
92,268
Latest member
willie110hh

Latest posts

Top