Search results

  1. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    Thanks @Dustin Jackson! Sometimes you really don’t have a true understanding until you’re in the wheel well digging around. Haha. When it comes time to replace the ball joints, I’m going with new UCA’s for a mild lift. For future purposes, what was your total rear lift?
  2. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    @Mighty Hd, you’re absolutely correct. After some research decided not to go with the 3” level.
  3. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    Hello all, been away for a bit due to life, but I was finally able to get the Yukon leveled. I went with Rancho Quicklifts all the way around. I also added Wulf 1/2 inch level kit in the front and ProRyde 1 inch blocks in the rear. Took a bit to figure what Rancho setting best suits the Yukon...
  4. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    Appreciate the info!
  5. CAMASO

    2012 Tahoe rear 1.5 lift shock question

    Thanks for the info!
  6. CAMASO

    2012 Tahoe rear 1.5 lift shock question

    How about your alignment after the spacers??
  7. CAMASO

    2012 Tahoe rear 1.5 lift shock question

    Sounds good appreciate it!
  8. CAMASO

    2012 Tahoe rear 1.5 lift shock question

    I agree the wheels need to come out a bit to be proportionate. I laughed when I read driving spiritedly! I’m going to purchase a set of spacers, so I appreciate the background. Thanks again for the link.
  9. CAMASO

    2012 Tahoe rear 1.5 lift shock question

    @iamdub, what wheel spacers are you using?
  10. CAMASO

    2.5”/1” to high in rear

    @Captain Insaino, looks good! How does it ride? So essentially you leveled 2.5” in the front and 1.5” in the rear?
  11. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    @Dustin Jackson, it doesn’t appear to have been used. But I did notice the left side of the lower strut mount was protruding from the housing. And the package it was shipped in was damaged. Most likely from the weight of the strut, since it was free floating in a very flimsy cardboard box. Smh..
  12. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    Just received my QuickLifts today. However, there appears to be some damage to the lower strut mount. The rubber appears to be protruding from the mount. Is this critical? Thanks!
  13. CAMASO

    2012 Tahoe rear 1.5 lift shock question

    No worries and thanks for the advice. I appreciate the clarification.
  14. CAMASO

    2012 Tahoe rear 1.5 lift shock question

    @redshift your post has been very helpful. I’m waiting for my Quicklifts and 1” strut spacers to arrive and I’ll be tackling the same job. I have a 14 Yukon with stock 20’s. Do you think I’ll have a similar rubbing issue? I’m also planning to install 2” coil spacers and new extended length...
  15. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    @Dustin Jackson I spoke to a Tech Rep at RealTruck.com who advised that 3” is the absolute maximum on stock UCA’s. In my case, I’ll probably be even better off since I’ll be installing Quick Lifts along with a 1” spacer. Apparently, from what I was told the Quick Lift is not a full 2” lift. So...
  16. CAMASO

    Can I use my stock UCA’s for a 3” lift?

    Hello everyone, I’m new to the forum and was looking for some advice. Without success, I’ve also tried to find the answer on my own by searching the forum on my own. I own a 2014 GMC Yukon SLT, RWD, and have already purchased Rancho Quick Lifts along with 1 inch spacers for a 3 inch lift. I have...
  17. CAMASO

    New to this forum

    Thanks for the heads up and I’ll be sure to provide the recommended information. Good to hear from a former Avalancher...lol
  18. CAMASO

    New to this forum

    Hello all from Maryland. I have a 2014 GMC Yukon SLT that I plan to begin adding mods. Glad to belong to a forum again. I previously owned an Avalanche and belonged to the Avalanche forum. So I know how helpful and informative forums can be. Take care all!

Forum statistics

Threads
129,197
Posts
1,812,003
Members
92,299
Latest member
Butterfly7

Latest posts

Top