Search results

  1. Dantheman1540

    Free to me 1996 GMC

    Ok ban me if you don’t want this here, but I’ve missed all you butt lickers and this involves a Tahoe for some bit of it. Anyway this is my new to me and free 1996 GMC2500 4x4, 5.7, 4l80e, ECSB. My uncle wrecked it into a palm tree in his driveway 5 years ago and just recently kicked the bucket...
  2. Dantheman1540

    NBS column harness

    I need some help plz, I’m looking for the harness that goes from the steering wheel with buttons to the rest of the truck. It’s a fairly big harness and I can’t for the life of me find an accurate part number. I just spent two hours pulling apart junk yard steering columns only to find every...
  3. Dantheman1540

    LTX A/T2?

    Looking at new tires since my 285/50/20 Nitto 420S's are getting old. I would get the 420Vs but they are back-ordered and I'd like a slightly taller skinnier tire this time so I've been looking at 275/55/20s and I can actually get a Michelin tire for less than the 420Vs! It's the LTX A/T2s and...
  4. Dantheman1540

    WTB Police Push Bar

    Looking to buy a used Police Push bar, it can be from any year because I will need to fab custom mounts anyway. It's okay if it has mild surface rust or faded paint but noting bent. I'm Located around Orlando and would like to find one local because I don't want to pay for shipping or to drive...
  5. Dantheman1540

    Lights behind the grille? or grill?

    First off is it grille, or grill? According to google Grill is to cook stuff on and Grille is metal bars or wires protecting something. Therefore I would assume it should be spelled grille when referring to the plastic thing "protecting" our radiators. Now that that is out of the way, I've...
  6. Dantheman1540

    Delrin? Poly? HDPE?

    Not sure if this is a good place to put this but since it involves a NBS Tahoe I figured what the hell. Between my Hurst shifter and NV4500 transmission sits a 3/8" spacer made of a piece of metal with rubber molded to it. It's an OEM part but it doesn't seem to survive more than a year. I...
  7. Dantheman1540

    Trans Temp Sensor Compatibility

    Just bought a gauge cluster with trans temp in it and I want to try to get it to work with the NV4500. The NV4500 does not come with a trans temp sensor of any kind but it should be fairly easy to add since the NV4500 has a PTO port on each side and there are PTO coolers available that space the...
  8. Dantheman1540

    Budget 4 piston rear swap

    Gonna go ahead and post this here so I don't clog up other threads like the 2021 4 Piston front brake swap. After I completed the 4 piston swap on the front of my 2004 Tahoe I loved the look and have been on the prowl for a way to bolt the same calipers on the rear of our trucks. They are an...
  9. Dantheman1540

    Mostly Stock NBS 5.3 Tune File HPT

    Anyone have a mostly stock but tuned NBS (Specifically 2003) 5.3 2wd tune file I can check out? Not really interested in any EFIlive/BBP files just because it wouldn't be as easy to swap info over to the tune I'm working on. I am working on a tune for another Tahoe (The white dog turd) and I...
  10. Dantheman1540

    Ole 2 Speed

    I've mentioned it in some other threads but figured I'd make a little build thread on it because I'll be doing a lot of stuff I haven't done before and in a more budget oriented manor. Ok so it's a 2003 (I think) LT 5.3 2wd Tahoe with 239k on it most of which were hard miles. A buddy bought it...
  11. Dantheman1540

    Hate to do this... Anyone have a OEM NBS Y pipe for sale?

    Hate to post another WTB because I'm sick of the scammers so if you're a scammer eff off! Anyway, I'm looking for a factory NBS GMT800 Y pipe with or without cats IDC. Trying to get a budget beater for a buddy up to daily driver duty and the PO cut the exhaust completely off just past the...
  12. Dantheman1540

    NBS 3" drop springs with bags FOR SALE

    Listed is a set of Eibach Part#3887.002 springs for the rear of a NBS, they should drop the truck 3" from stock. They also have a set of Airlift performance part#46127 helper airbags in them. The springs were used for about 18 months and the bags right at one year but only inflated a dozen times...
  13. Dantheman1540

    Coilover springs and Torsion keys for sale

    Eibach springs 8" long and 1,000# for use with 2" coilover shocks, I bought used and ended up getting a different set for my coilover swap so I don't need these. These are great for a Tahoe/Yukon wanting to coilover swap lower than stock height. (these are the exact same spec spring I used I...
  14. Dantheman1540

    WTB Z71 Fogs/brackets NBS

    Looking for some NBS Z71 round fog light brackets, bonus points if they have old fogs with them even if they are nasty and don't work. I want to come up with a better mounting solution for DIode Dynamics SS3 Pro fog lights in the Z71 valance. If you have a set laying around let me know!
  15. Dantheman1540

    2019-2020 Brakes on NBS

    So I heard a rumor that 2019-2020 4Piston brakes will fit the NBS trucks. Notice I said heard not seen but the guy said the mounting holes for the calipers line up just need a washer to space it out a tad. Anyone have any evidence or a way to find out?
  16. Dantheman1540

    (Sale pending) Hellwig 7702 front sway bar (NBS)

    I have this badass sway bar ready to go just doesn't come with end links or poly bushings, BAR ONLY! I'd like to get $125 but I really don't want to ship it because it will likely cost that much to ship it.
  17. Dantheman1540

    Naughty Pics of a BBP autocal and cocks SOLD SOLD SOLD

    Just found this while I was moving. I haven't used it since 2017 but it turns on when plugged in and I only switched to HPT so i could learn to tune myself. Not really sure what's it's worth so I'll throw out $200 OBO.
  18. Dantheman1540

    NBS rear spring options 2-3" drop

    I currently have Eibach 3882.52 coupled with shock extenders and some old but not 2004 old KYB shocks also, the free travel mod has been done and I do not believe it's bottoming out but I will test that tonight. The rear just rides rough and has been exacerbated by the recent front upgrades. I...
  19. Dantheman1540

    Torsion bar de-cranked fender height please!

    Just did coil overs and I forgot to measure the fender height before I chopped everything off. If anyone has a NBS with fully de cranked torsions bars, a 3" drop in the rear, and a 31" tire that could get me a fender height measurement in the front I'd be forever in your debt. Currently, mines...
  20. Dantheman1540

    SOLD!!!!! (Belltech 2508)

    Bought a set of these earlier this year planning to drop my Tahoe more but after swapping in a 14b AXN rear axle I have somewhat run out of room to go lower in the rear and don't want to drop the front anymore. I've heard these ride way better than just de-cranking torsion bars and if you're...
  21. Dantheman1540

    What happened to TOTQ?

    I see 2019 was the last time a TOTQ was done. I feel ripped off I want in on the action, the Covid seems to have brought more people back to forums can we try this again?
  22. Dantheman1540

    WTB 8.25 ifs Front diff with 3.42s or 3.73s

    Looking to swap gears in my silverado and would like to trade or buy a front diff with 3.42s or 3.73s (preferably 3.42s). I can pay cash, card, kidney or trade you my recently rebuilt (3 years 25k miles ago) front diff with the highly coveted 4.10 gears. The rebuild was done by The Rust Lab in...
  23. Dantheman1540

    Louder idle but no drone dual 3"

    Everybody loves exhaust threads so here's another one. Ok, the current setup is Long tubes, tiny "performance cats", massive Flopro 2500, and dual 3" out the back. It's so quiet I hear the fans and the lifters over the exhaust. In fact, unless you crouch by the tips the exhaust is basically...
  24. Dantheman1540

    TSP 212/218 .600/.600 112lsa for sale

    Selling the cam I just pulled out of my Tahoe. It has somewhere around 35k miles on it and it genuinely looks like new. Pulled because a valve spring broke so I had the heads off and had a bigger cam laying around I put in. My opinion of this cam is that it's the perfect 4.8, 5.3 for someone...
  25. Dantheman1540

    ECT sensor harness/Plug

    Broke the connector that plugs into the ECT sensor on the driverside head. Would like to find just a pigtail with the connector I can solder on and fix my issue. Anyone have a part number for it? Would like to find one that I can pick up locally or have delivered by Sunday.

Forum statistics

Threads
129,127
Posts
1,810,864
Members
92,214
Latest member
George ramos

Latest posts

Top