Search results

  1. P

    2/3 drop kit on a 2018 PPV?

    I installed the same kit on a 2019 suburban ,regular suspension, and had to cut the same bolt off a bit. Not sure how much I cut, maybe 3/8, but the stock wheel still didn’t fit and ended up putting the aftermarket wheels on earlier than I wanted to.
  2. P

    2015 ppv Lowering help

    I have a suburban 19 with about a 3/4 drop in 24s with 305s, probably closer to 3/5, but I haven’t measured really. Here’s some dirty pics!
  3. P

    Help with dropped suburban rear too soft

    Hello everyone, I have a 2019 suburban with no auto/mag ride. I installed the belltech 1019 kit with spindles. I ended up getting street performance front and rear shocks which bright it to where I wanted at about a 3 / 4ish drop. Fast forward a year or more and the rear keeps settling more and...
  4. P

    Rear suspension clunk noise after lowering

    I had the same issue when I dropped the suburban. I ended up being the control arm I had loosened and didn’t torque to spec again. Drive me crazy and has the same symptoms you described. Might wanna look there if it comes back.
  5. P

    Front tires rubbing Eibach swaybar

    I have the same issue but mine looks like it contacts the sway bar a little more. I have original sway bars on 305/35r24 with 3 / 3.5 drop in front.
  6. P

    Show off your 2015-2020 lowered tahoes and yukons

    Ended up removing all spacers in the rear which came out to about 4”, dropped the front with spindles and struts to 3 and 3.5 fit the Chevy lean. I added the end links and just did the free travel mod. The rear is loaded a bit right now with the air lift bags having about 10psi in them. Love the...
  7. P

    Show off your 2015-2020 lowered tahoes and yukons

    maybe a little late but I put on Belltech so shocks and struts on my 19 suburban (non mag/auto) and while it did make the ride more controlled it does make the surface imperfections more noticeable. On the highway it does ride nice but in the slow city speeds with bumps/cracks they are felt...
  8. P

    Extra plate?

    Yeah it looks stock to me based on welds and the hole in the bottom of the bracket. Just never seen mention of it before. Thinking about cutting up to that bracket only. I’ll post pics
  9. P

    Extra plate?

    So I’m getting ready to do the free travel mod and found this plate welded to the frame. It’s not on the other side so I found it odd. When we bought the car (used from dealer) they said it was in an accident on this side which is the passenger side. I can’t find anything indicating this is...
  10. P

    Show off your 2015-2020 lowered tahoes and yukons

    I tricked the wife into getting some struts for the front . Planning on lowering the front an inch.
  11. P

    NEW DJM EL2007 Rear Offset Swaybar Links

    Too late for these, they sold. If anyone has a set pm me please
  12. P

    Show off your 2015-2020 lowered tahoes and yukons

    Belltech 2/4 on 19’ LT no auto ride. I hope the front end will settle a little more because the spacer is already installed on the coils.
  13. P

    NEW DJM EL2007 Rear Offset Swaybar Links

    These work for 15 and up Tahoe/Suburbans too right?
  14. P

    Lowering rear 1 to 1.5 inches?

    It seems a little too "mushy or soft" over stock but it's not bad. I realize it but the wife hasn't said a thing and she drives it more. Trying to get a full kit from Tony but it seems his site is down right now
  15. P

    Lowering rear 1 to 1.5 inches?

    Got the same kit on my 19 suburban. I think if you use the factory isolators you'd probably be sitting at about 1.5 drop

Forum statistics

Threads
128,781
Posts
1,805,313
Members
91,760
Latest member
MyCleftNut

Latest posts

Top