Rocket Man, Thanks for this information, could not find anywhere. With your information, was able to find all the parts on ebay. Thanks for takeing the time to help. Jerry
Question-rear bumper. The plastic piece that has the cap, were you stick the rod in to lower the spare tire. What is this called and the part number, and were to find? New, not junk yard. Thanks Jerry
This is for the early 90's trucks that have the soldered bulbs in the dash sockets. Everything posted is about ten years old. Has anyone found a socket that will accept the led bulbs. Superbright has sockets that the locking tab is off and will not work. What are you doing to get the led's...
1992 Silverado K1500 Same as Tahoe or yukon I removed the center link to replace with new.
My problem is that I forgot wich way it goes in.
So there is 3 1/2 " between the ball joint hole on one end and 5 1/2" between ball joint holes on the other end.
So what end goes on the pitman arm...
The snap ring was already installed on the new condenser that I bought from GM. I drove about 3 miles while the trans. fluid was being pumped out. Put new fluid in. Trans seems OK.
Well, not to happy about my condenser replacement. Seems that the transmission line from the radiator to the condenser was not not installed properly and popped out, causing all of my trans, fluid to be dumped on the highway. There is a small plastic cap that was not seated over the snap...
Remove transmission pan. Remove two bolts from the trans. rear mount. jack back of trans. up as high as it will go. Twist pan to left, comes right out.
Thanks for the information. My converter arrived last week. Bought a transmission jack from Harbor freight for 99.00 So I'm just about ready to get started. Jerry
Tiredmechanic When you pulled your trans, Did you remove the entire exhaust system or un-bolt from the exhaust headers and cut the pipe under the trans? Thanks Jerry
The torque converter that I quoted, I talked with them about this. They give different options for this unit were you can upgrade. This unit is running about 500.00 total. I also pull a boat and trailer, plus it's 4wd. I wanted to keep the stall about 1800.
I talked with trans builders and...
That is the old style TBI. When you had your top cover off, did you see any fuel rail or injectors going into the heads? There were two types. Fuel injection and the throttel body injection Do a google search and you will see if this is what you have
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.