Search results

  1. George Cobos

    Spindles w/torsion keys or rcx 6inch lift?

    I know what you mean about going higher than 4-5". I barely fit in my garage with the height that it is at. I was also able to due a tune for the larger tires too and noticed a big difference in shifting and pick up.
  2. George Cobos

    Spindles w/torsion keys or rcx 6inch lift?

    The only reason I went back to the torsion bars is the kit i got with the coilovers seemed very bouncy at low speeds. The only way i can describe it is when you see those rice burners going down the road and you see that slight bounce. It was annoying to say the least. But off road and...
  3. George Cobos

    Electric Fans Vs Clutch Fans

    Hey guys i know this is an old thread but i finally got the nelson performance wiring efan kit and the tyc 622230 fans along with the hp tuner. can anyone help me out on what setting to put the files at for the tune?
  4. George Cobos

    Front coil over shocks

    Sorry so late to respond. No I don't sorry.
  5. George Cobos

    Spindles w/torsion keys or rcx 6inch lift?

    Still working on other pics but fixing up front end due to recent accident.
  6. George Cobos

    Spindles w/torsion keys or rcx 6inch lift?

    actually i was able to do it let me get some pics i got about 4 to 5 inch lift i think. my ride height from ground to bottom of fender is at 41" in the front and 40 in the back.
  7. George Cobos

    Electric Fans Vs Clutch Fans

    01 tahoe with a 34" radiator
  8. George Cobos

    Electric Fans Vs Clutch Fans

    Ok cool so i can go with the 05 and up fan kit since i have the 34" radiator and the nelson wiring kit and get the hp tuner and tune myself? correct? where do i get the firmware for the computer?
  9. George Cobos

    Electric Fans Vs Clutch Fans

    if i buy this will i be able to tune the computer to turn on the fans? sorry Im mechanically inclined on the vehicles but not when it comes to the computer stuff. https://www.hptuners.com/mpvi2/
  10. George Cobos

    Electric Fans Vs Clutch Fans

    cool thanks for the info guys any suggestions on this reason im asking is not to try and do it the easy way it is because there is no one within 100 miles where i live to do the computer tune and the temps here are extremely high so idle sux we are usually a 99 degrees an higher pretty much til...
  11. George Cobos

    Electric Fans Vs Clutch Fans

    question on these efans can they be installed and use a radiator probe to turn on at certain temps? or does the computer have to be tuned no matter what?
  12. George Cobos

    Spindles w/torsion keys or rcx 6inch lift?

    well no one replied but i spoke to cody at bds suspension. He said ill prob get about a 5.5 inch lift in the front if i put leveling keys based on the photo i sent him since im still about 1.5 to 2inches from uca bump stop. Ill try to get it done this weekend and post pics if anyone is interested.
  13. George Cobos

    3 inch lift spindles with 1-3 lift keys

    Looks good so far. Dont know if you mind letting me know what the height from floor or center of wheel to bottom of fender came out to. Also how angled your tie rods and ball joints ended up at? Thanks
  14. George Cobos

    Spindles w/torsion keys or rcx 6inch lift?

    Hey guys I need some advice or opinions and thoughts. I have an 01 Tahoe rwd that right now my current set up is coilover conversion in the front from atomicfab with 3" knuckles and z71 rear springs and running 275/60/20 on 20x9 with 4.5BS (33x11x20). It puts me at a ride height from ground to...
  15. George Cobos

    Front coil over shocks

    Right now i have these in the front of my 01 tahoe with z71 coil springs in back. very stiff ride great on highway travel but when doing about 30-55 you can feel a little bounce in the front. Ive messed with the rebound and compression rates since they are adjustable but a lot of bad roads...
  16. George Cobos

    3 inch lift spindles with 1-3 lift keys

    cool thanks for the info. i tried it with the factory keys when i installed knuckles but it was too soft so i did the coilover conversion but now too bouncy like i said like a rice burner. so now trying the supreme suspension keys. ill keep updating and see what the outcome is. And yes I'm...
  17. George Cobos

    3 inch lift spindles with 1-3 lift keys

    I took off torsion bars and put these from atomicfab great product but again a little too bouncy for me plus i want more height and if i crank these up theyll just get bouncier. so im going back to torsion bar set up and have the 3" knuckles on it so wondering if i should go with rough country...
  18. George Cobos

    3 inch lift spindles with 1-3 lift keys

    Yeah im going to take off the coilovers i did a coilover conversion from torsion bar but do not like the ride its very bouncy like those rice burner cars so going back to the torsion bar key lift with 3" spindles
  19. George Cobos

    3 inch lift spindles with 1-3 lift keys

    Let me know if you did this and how it turned out. Right now I have the spindles with coilover conversion in the front and z71 coil springs in the back and im level at 25" from center of wheel to bottom of fender. I too am thinking of adding the torsion bars back and using leveling keys to get...
  20. George Cobos

    How To : Aux cooling fan/ condenser fan install with pics!

    I I found the harness at group1autoparts.com it was approximately $30
  21. George Cobos

    How To : Aux cooling fan/ condenser fan install with pics!

    Hi there first of all great thread i did this to my 01 tahoe yesterday since i live in south texas and we are having 100 plus temps latley. i followed everything you put to the T. Only thing is i had to reverse the wires on the efan because when i installed it was pulling instead of pushing so...

Forum statistics

Threads
129,117
Posts
1,810,714
Members
92,204
Latest member
22loweryak

Latest posts

Top