Search results

  1. C

    Had a lifter temporarily get stuck. . .

    what this guy above said. specifically there are some oil cleansing additives known to help clean lifter passages and the such. basically decarbon the inside of the motor. then do a oil change ASAP afterwards. follow the directions and press on. good attempt to buy you time before pulling heads...
  2. C

    Windshield damaged

    the cameras are usually located in the black housing behind your rear view mirror. the box glues or mounts to the glass back. isn't heart surgery and its the same as pulling the rear view mirror as far as the glass tech is concerned. either way, if its a competent shop/tech this should be a...
  3. C

    Windshield damaged

    glass is actually pretty cheap. search around your area and call for quote, the HUD units add a different mix to things but if you don't have one then its easy peasy. i second the notion of avoiding safelite. they are a big name that will get it done but not for a lack of cast and without care...
  4. C

    Brakemotive rotors and pads?

    i used them on my NNBS sierra, the rotors were just fine, lasted a while etc. the pads were cheap ceramic pads that squeeled when wet or cold. i swapped them out for some good EBC pads and got much better braking and less dust. not that the motives had high dust. i have a brand new set of...
  5. C

    Trade my buckets for your bench seat?

    where are you located sir
  6. C

    in need of stock rear springs and shocks asap!

    yea i disconnected them and made zero different. shocks only make effect when the springs will actually flex lol. these turds are bricks. anywho, got an invoice from tony yesterday...new suspension coming in soonish and well get this turd fixed up anyways
  7. C

    Lsa blower

    you would need new injectors, not only due to flow rate but also size, LSA fits a different injector. stock pulley should be in the 6.5-7.5 psi range. most get the snout upgraded before install as its easier and a cheap mod, allows pulleys to be bolt on and then then pulley down one which gives...
  8. C

    Advise from Wheel Experts

    another thing everyone missed, are these wheels hubcentric or were hub rings used to center the wheels to the vehicle? if not you can get the balance dead on but the wheel may not be bolted on centered to the hub and make her shake
  9. C

    Lsa blower

    yes you use adapters, several companies make them, only raise your intake approx. 3/4" and i fit a holley high ram intake on my NNBS no problem. have to remember these have truck intake manifolds which are very tall. when compared to a car intake that's several inches shorter you get plenty of...
  10. C

    Lsa blower

    not impossible. basically a intake manifold swap and front accessory change or adding a lower pulley and idler. plus a little rerouting of vacuum lines and wires for some sensors. maybe some harness lengthening or adapters for sensors. will need drive by wire as mentioned. and obviously a tune...
  11. C

    “Driver Door Open” message on 2009 Tahoe LTZ

    let us know what you figure out, I'm having a similar problem with the door switch not telling the truck its open, so opposite issue but same switch. radio stays on and lights don't react with door open. i have door panel off for window regulator replacement. have new exterior handles coming...
  12. C

    in need of stock rear springs and shocks asap!

    so finally got a minute and climbed under her with a light, degreaser and rag and wiped the rear springs clean as can be. zero stampings, marks, etc. just black coils. no tags or anything either. guess that rules out ID'ing what these are. still up for snagging some used stockers if someone has...
  13. C

    2012 suburban partout

    guessing this is sold, scrapped etc since no reply in a while by OP
  14. C

    in need of stock rear springs and shocks asap!

    swathdiver, that's correct on the RPO codes, haven't looked super super close at springs to see any markings but there wasn't anything easily readable. have to get a rag and flashlight and really wipe them down and search i guess. just seems odd, the fronts soft(like super soft from worn 136k...
  15. C

    in need of stock rear springs and shocks asap!

    so i don't know what the odds are someone has stock springs and shocks, mainly springs for a Tahoe/Yukon nnbs laying around that would either ship or happen to live near the panhandle area of florida (Pensacola, destin, lower Alabama, etc) that they would let me get and use for testing. reason...
  16. C

    Tech ii and wiring gurus need your help

    I tested some more today finally(racetrucks taking most of my time when I'm not at work) I can control passenger lock, window, etc via tech ii. Won't even comm with driver's switch like it's not even there. Data line from switch to bcm is perfect, did a continuity test on it, power, ground...
  17. C

    Tech ii and wiring gurus need your help

    So I have not tried using the tech ii to command those items specifically but I will try that next, thank you. I do know the key fob will unlock both passenger doors just fine
  18. C

    Tech ii and wiring gurus need your help

    So just to update and try to dig for further info, I verified wiring thanks to a member getting me diagrams. I can get rear windows to function via direct power off battery, all wiring tested. Comm lines continuity to bcm is proper from main switch. Everything appears mechanically as it should...
  19. C

    Question on tire size

    post up pics once you get them on please and how you like the ride, rubbing, etc. your on a 4/6 drop to correct? I'm looking at doing a 3/5 on my Yukon with a 305/40-22 so this info would be good to consider.
  20. C

    How much to repaint Yukon front bumper cover?

    i still want to know what paint your using that costs $60 for 2k, primer, base, and clear. cause last time i bought clear i paid that alone for a qt. and that was mid grade stuff
  21. C

    Vortec Engine Cover

    Sofi09 not trying to thread jack but you can PM me if your wanting one for your 09, i have one off my truck ill sell cheap if youll cover shipping
  22. C

    High mileage cam swap ?’s

    BTR is great to deal with, ive done many swaps on LS motors over 150k plus. care must be taken when removing and installing new cam. inspect the bearings carefully best you can. if all looks well, no chunks, gouges, etc etc then move on. have a turbo truck motor with cam and 267k miles stock...
  23. C

    2012 suburban partout

    bumpin a old thread but devilmk4 do you have the passenger seat belt/ retractor assembly? just bought a 08 Yukon and the belt is cut...would need shipped to 32569 if you do sir
  24. C

    WTB: NNBS engine cover

    i know its been six months so your probably not looking any more. if you are pm me and i can ship you one. just bought a Yukon and i never run a cover on mine lol
  25. C

    Tech ii and wiring gurus need your help

    Mines 2wd slt so "c" should be accurate then and show comm or no comm appropriately then I presume. Received your email, diagrams look perfect sir. Thank you very much. Have to tear into the motor in my racetruck tomorrow but hopefully Tuesday I'll get back to yukon diag. Next step will be...

Forum statistics

Threads
129,203
Posts
1,812,068
Members
92,305
Latest member
DefiantOne

Latest posts

Top