Search results
-
2007- up aftermarket hood
https://www.bmcextremecustoms.net/20gmcyuheexh.html This is the only hood I found for Yukons, not sure if that's the look I had in mind. But it's not bad looking -
2007- up aftermarket hood
I had looked into aftermarket hoods for my Yukon and you are right. They sell scoops, but not full hoods for 07-14 Yukons. I thought about seeing if one of those Cervinis aftermarket Tahoe hoods could be modified to fit a Yukon. But at that point it would probably be easier to just customize a... -
EVAP Charcoal Canister Removal Modification
So I was doing a little more research on people removing EVAP systems from other vehicles. I read someone with a older Silverado saying that if you unplug the electrical plug on the purge valve under the hood, then the computer will get no signal at all from the EVAP system. I also read that if...- Booby1323
- Post #7
- Forum: Performance
-
-
EVAP Charcoal Canister Removal Modification
I agree with that, it seems like a relatively simple task to manage these gas fumes, yet the whole system is so unreliable and susceptible to dust. If there is a way to safely remove the whole system and throw it in the trash I might just go that route. I bet a larger vent line would help, but...- Booby1323
- Post #3
- Forum: Performance
-
EVAP Charcoal Canister Removal Modification
Hey guys, I've been having issues with my EVAP system for a while. The issues started with a slow filling fuel tank, and after attempting to fix that a while back... I ended up with a slow filling fuel tank, multiple leaks in the system, along with the occasional "tighten gas cap" message. Long...- Booby1323
- Thread
- Replies: 19
- Forum: Performance
-
Spyder Yukon Taillights anyone have them?
These are screenshots from a video I took when I was putting in my escalade lights. The light on the right is similar to what your looking at -
Spyder Yukon Taillights anyone have them?
Im not sure if they were "Spyder" but I had a set of lights just like that on my Yukon and I currently have them for sale locally. Im not sure of I have a picture but I know I have a video somewhere with them installed -
Let's see some pics of some lifted and leveled
Just a leveling kit (3" in front and 2" in rear) Wheels are 20x9 Moto Metal 962's with custom center caps (-24 offset) (One pic has the old ugly Moto Metal Caps in it) Currently has the BFG 275/60r20 KO2s that came with wheels, but I have a new set of 285/60r20 Nitto Ridge Grapplers that looked...- Booby1323
- Post #953
- Forum: Lifted Supension - Z71 & 4x4
-
Trade wood grain dash for brushed aluminum 2009 Tahoe
Rest of my interior is wood grain except the trim around my radio/hvac controls is the silver that your talking about. Being honest, my silver piece does have a scratch in it... Not sure if youd be interested, but I could take a picture if your interested in swapping -
Stealth subwoofer install options
Another idea of mine was to gut an extra pair of third row seats and build sub enclosures on one or both of them. Id probably try to mount the amp on the enclosure and try to have the signal and power cables on some sort of plugs so that they could be easily removed for cargo space should it be...- Booby1323
- Post #5
- Forum: Audio & Electronics
-
Stealth subwoofer install options
The same guy on ebay that makes the center console box you mentioned (I believe Rodney's Boxes is his name) also makes a box for between the second row seats if you got the captains seats back there. I considered getting one but I think I want to build my own because I wanted to put a JL 10w7...- Booby1323
- Post #3
- Forum: Audio & Electronics
-
Wireless charger?
Well sorry for taking so long @Moose912 but I got some pictures. I didn't take pictures of underside on console lid opened up. But it was pretty easy to run wire through lid and to 12v plug inside console. Im sure it would be easy to hard wire charger rather than use the plug if you wanted to... -
-
Wireless charger?
Yes I have done what I think your explaining. I bought a fast charging wireless pad with pretty good range and I installed it underneath the hard plastic that is underneath the rubber pad in the bottom of the tray you speak of. I don't remember the exact charger I bought but I can get a 25%... -
BCM Tuning
So I was just curious if anybody found a place to do BCM tuning? I contacted the link that @kbuskill posted and they said they are not taking BCM tuning orders "due to the massive amount of time they take". In my opinion the service shouldn't be up on their website if that is the case but thats... -
Yukon Quad Retrofit- Morimoto MLED
Alright and heres some driving pics. The first pic is only the fogs and halos on. The second pic is my brights (profile projectors in addition to MLed highbeams). The third is the MLED low beam only. They are awesome! -
Yukon Quad Retrofit- Morimoto MLED
Thank you! Yours look awesome! Id say the MLED low beams are just little less bright than yours and a little less blue in temperature. The housings are new set off ebay. I think some of you guys might call them DEPO lights? Im not sure but there were very decently priced and easy to open up. I... -
Yukon Quad Retrofit- Morimoto MLED
Thanks guys! Heres the links to everything except the switchback LED strips. Those were just cheap Chinese strips off of Ebay… so hopefully I get atleast some life out of them Morimoto MLED Hi/Lo Beams: https://www.theretrofitsource.com/bi-led-morimoto-m-led-headlight-projectors.html... -
Yukon Quad Retrofit- Morimoto MLED
Heres some shots in the dark. Ill be on some dark back roads this weekend so i can take some actual driving pictures if you guys wanna see how the MLED look in use. They are awesome tho. I have zero regets going the LED route rather than HID. -
Yukon Quad Retrofit- Morimoto MLED
So heres some shots from this morning in the light -
Yukon Quad Retrofit- Morimoto MLED
So I finally finished my retrofit for my 09 Yukon and wanted to share my first project with you guys since joining the forum. This is my first attempt ever at retrofitting and ive spent a lot of time researching the parts and procedure to pull this build off as I was very nervous to mess... -
Could a NNBS Tahoe Hood fit on a NNBS Yukon?
https://www.cervinis.com/07-12tahoe-ram-air-hood.html Technically this is the link for a Tahoe if anyone else was curious. The first link was for an Avalanche.. but I think Avalanche and Tahoe hoods are the same anyway. -
Could a NNBS Tahoe Hood fit on a NNBS Yukon?
Was browsing around the internet and came across this ram hood for a 07-12 Tahoe... https://www.cervinis.com/07-12avalanche-ram-air-hood.html I have a 09 Yukon and have previously looked into aftermarket hood options but I have found little to offerings for a NNBS Yukons. Im curious if anyone...
