Search results

  1. Maxclass

    Leveling and front bump stop/jouncer questions

    Yes I did last night: https://www.tahoeyukonforum.com/threads/mainting-z-height-with-torsion-key-lift-leveling-kit.108742/
  2. Maxclass

    Leveling and front bump stop/jouncer questions

    Did anyone reply to this post? I have the same concern about leveling the front while maintaining "Z" height.
  3. Maxclass

    Mainting "Z" Height with Torsion Key Lift (leveling kit)

    None of the posts on this forum seem to address maintaining "Z" height when leveling the Tahoe. Not only that, but YouTube ignores this concept too. Fact: My Tahoe has a disclaimer sticker on the crossmember holding the keys that states when installing aftermarket keys ensure the "Z" height is...
  4. Maxclass

    Oil Pan Replaced - oil drops on bell housing

    I had wiped off the oil drops on the bell housing. Thanks for the info on using a mirror. That sounds more effective than reaching back there with my hand feeling for signs of oil.
  5. Maxclass

    Oil Pan Replaced - oil drops on bell housing

    I replaced my oil pan this past weekend as a weekend warrior project for my 4x4 Tahoe. Truck has 175,000 miles. See my before and after pictures for the amount of the oil leak accumulating over time compared to the new pan. Mechanic wanted $700. Total DIY cost was $70 except add an additional...
  6. Maxclass

    Rough Idle in Rain

    Same issue was brought up on this forum: https://www.gmfullsize.com/threads/rough-idle-in-heavy-rain-and-in-the-car-wash.277900/
  7. Maxclass

    Rough Idle in Rain

    My 2004 Tahoe Z71 flex fuel has the exact same symptom: rough idle in the rain (including car wash). Although it is throwing a P0300 Code. Did you ever find a solution? I replaced my spark plugs since then, so I know it's not those. P0300 code pulls multiple causes. Hard to pinpoint.
  8. Maxclass

    2000 tahoe lower end ticking sound

    What did this end up being?
  9. Maxclass

    2000 5.3L Oil Pan Removal

    Can you follow up on what happened? This is the fourth question unanswered on if removing the front differential is required for clearance of the oil pan. I plan on performing this soon and will post to the forum afterwards with my experience.
  10. Maxclass

    Oil pan gasket on a 4x4

    For whatever reason on this forum this question seems to go unanswered. Did you end up removing the front differential in order to remove the oil pan?
  11. Maxclass

    Oil pan gasket replacement

    Can you provide an update on this process of removing the front differential. This forum is filled with comments about performing the procedure but no one has followed up with successfully accomplishing it. Haynes manual states to completely remove the front diff, including draining the gear...
  12. Maxclass

    Oil pan gasket

    Can you fill us in on what had to happened with the front diff? I am about to change my oil pan gasket on a 4x4 Tahoe Z71 and have been reading the front differential must be dropped to provide enough clearance in removing the oil pan.
  13. Maxclass

    Motor Mount replacement - easiest approach

    Pictures of this process would be extremely helpful.
  14. Maxclass

    Motor mounts?

    How did you end up replacing your motor mount (what process did you use to lift motor) and what brand of motor mount did you go with?

Forum statistics

Threads
129,206
Posts
1,812,128
Members
92,306
Latest member
Juju14

Latest posts

Top