Search results

  1. asand

    Lifter tick and performance cam swap

    I have a lifter tick slowly getting worse in my '04 4.8. Looking at a Texas speed cam 2004 GMC Yukon TSP Stage 1 Low Lift Truck Camshaft (208/214, .550/.550, 112 LSA). What I'm wondering is if aftermarket cams are better than OEM for coming apart shedding metal from the lobes or whatever it it...
  2. asand

    Looking at getting a new AGM battery from Les Schwab.

    Ive ran my battery down once before and recently left my truck sitting for 3 weeks with a leaking radiator. Now my battery doesnt hold a charge for a week. I'm short on cash so I'll be putting a battery on my account at Les Schwab here in the PNW. Is anyone familiar with the Les Schwab branded...
  3. asand

    Rear HVAC broken blend door

    Today I pulled the interior trim to swap the blend door motors on my rear HVAC in my '04 Yukon. Ive found that in addition to the motor not working, the temp blend door is actually broken and dangling in the housing. Does anyone have a part number, link, or anything else to help me fix this? I...
  4. asand

    NP241 swap

    Ordered an NP241C, front driveline, and speed sensor pigtail from ebay. New t-case seals, gasket, and light switch pigtail from Rockauto, and a shifter from car-part. The front drive clutches are slipping, and I wanted to swap out for a 241 anyway for a future SAS or someting more exotic like a...
  5. asand

    Chevy Traverse wheel on '04 Yukon?

    Looking for a 17' spare to fit over my '07+ front brakes. Wondering if anyone has tried bolting on a 7x7.5 Steel traverse wheel. The six spoke design doesn't look hideous for fear mounted spare.
  6. asand

    I was playing on the dunes and then this happened...

    I was practicing social distancing when this happened at Oregon Dunes near Florence. Too steep to turn, getting stuck sounded better than rolling.
  7. asand

    Headlights suck, any good LED or HIDs??

    My headlights suck and I would loke to upgrade them. Any recomendations on HID or LID bulbs, ballasts that arent china junk? High quality China is OK.
  8. asand

    New DIY front skidplate and other work

    Today I bought a sheet of thin (maybe 4mm?) aluminum sheet diamond plate and built a new skidplate 16"x17". ALso installed Rancho RS500X shocks. Not really impressed with the shocks, the old one may have been better, bot they are not going back on lol.
  9. asand

    New front skidplate and other work

    Today I bought a sheet of thin (maybe 4mm?) aluminum sheet diamond plate and built a new skidplate 16"x17". ALso installed Rancho RS500X shocks. Not really impressed with the shocks, the old one may have been better, bot they are not going back on lol.
  10. asand

    Bose AMP and GM RAP bypass

    I bought my truck with a pioneer headunit running into the Bose amp and it was working great, albeit with a ground loop whine. Recently the stereo started staying on after the truck was shut off and doors opened, although there was no sound output. Now when the truck is running there is now...
  11. asand

    NP 241 transfer case swap ideas

    I'm considering an NP 241 swap in the distant future incorporating a cable shift. I was first thinking about incorporating an automatic trans shifter into the cup holder area of the console, from a FWD Honda or something and modifying it to shift the TC. I then started wondering if there was a...
  12. asand

    Went for a mountain snow drive today

    Drove up Roman Nose Mountain near Walton, OR today with my daughters. Truck was running great, new Yukon Duragrip was working good.
  13. asand

    Question before replacing Gov-Lock with LSD

    Next weekend I want to buy an Auburn Gear Limited Slip Or possibly spend more on a locker. I just wanted to make sure the 10 bolt in my '04 Yukon SLT 1500 has 30 pline axles. I have also considered swapping in a wrecking yard open carrier and luchbox locker as I had one in my '96 Silverado and...
  14. asand

    Millican meet/trail ride.

    Just discovered the millican trail system outside of Bend Oregon. Thought we might organise a meet/trail ride between us and any non Tahoe/Yukon buddies. I would be down for May 2019.
  15. asand

    Hard Mounted Ammo Can Compressor Caddy

    Last night I hard mounted an ammo can to secure my compressor rather than have a flailing death compressor bouncing around in the back of the truck. I removed the tie-down point in the right rear of Mimi and drilled a 10mm hole in the bottom of the can. I then used a longer bolt stolen from my...
  16. asand

    Uniden PRO520XL CB Radio Installed

    Yesterday I picked up a Uniden PrRO520XL with Coax, 4' Firestik II, and bracket. I stalled the radio in the lower cubby and soldered the leads directly to the cigarette lighter.
  17. asand

    Ground loop whine in stereo

    I have an '04 with a Pioneer AVH-P3100DVD presumably running into the OE Bose amp and speakers. There is a prominent Ground loop whine that I would like to fix. Do you thinks it's as simple as a shoddy ground/ power connection on the stereo, or could it be an issue with the Bose? Any common...
  18. asand

    '04 Yukon SLT Oregon Coast

    Hello from the Oregon Coast. I recently traded my '15 V6 6spd Camaro for an 04 Yukon. Hope to meet some new folks and share ideas here. Camaro5 was a little too quiet, hoping this will be more like maxima.org or bitog. Aaron

Forum statistics

Threads
129,125
Posts
1,810,835
Members
92,211
Latest member
patrickleeleep

Latest posts

Top