Search results

  1. Kaeden

    Brake Pedal Pulsing And Wheel Pulling Occasionally

    Neither. The only time I've ever had an ABS light on is when one of the hubs was bad. But as I said before, I've replaced both of them about a million times. As far as checking rotors, if it had something to do with the rotors, wouldn't it be doing it all the time? If I have the windows down...
  2. Kaeden

    Brake Pedal Pulsing And Wheel Pulling Occasionally

    I know they're not just painted. I'm pretty sure they're Perfect Stop's "Performance" calipers. Found them on amazon and they look just like the ones that are on the vehicle.
  3. Kaeden

    Brake Pedal Pulsing And Wheel Pulling Occasionally

    Hey Guys! Hope everyone is having a good day! I just have a quick question. Ever since I got the hoe, occasionally when I'd be coming to a stop slowly (and by slowly I mean no hard braking, just a regular stop, at a red light or stop sign for example) by the time I reach about 5mph or less, the...
  4. Kaeden

    Blown Rear End, No Drive Now?

    That’s the plan man. Going to get a rear end tomorrow morning. Just wanted to see if anybody knew anything obvious that I didn’t. Sent from my iPhone using Tapatalk
  5. Kaeden

    Blown Rear End, No Drive Now?

    Didn’t even think to make this clear. But the rear end is definitely gone. I’ve pulled the cover and one of the spider gears is completely gone. I’m talking like chunks in the bottom of the casing. I honestly couldn’t tell you how it’s still pulling but it still moves. I guess there’s enough of...
  6. Kaeden

    Blown Rear End, No Drive Now?

    Okay guys so I have a question. I managed to grenade my rear end tonight. The weird thing that I can't figure out is, my Drive gear seems to have somehow gone with it? To be clear, the vehicle still moves, the rear end is just in really rough shape. I was actually able to limp it back to the...
  7. Kaeden

    "Laying Back" with 6" Fabtech Lift?

    Gotcha. Thanks! Sent from my iPhone using Tapatalk
  8. Kaeden

    "Laying Back" with 6" Fabtech Lift?

    What if I ran stock springs, could I still run lift shocks? Sent from my iPhone using Tapatalk
  9. Kaeden

    "Laying Back" with 6" Fabtech Lift?

    Here’s a pic for reference as to where I’d LIKE for it to be. This is with NO rear coil springs. It’s currently resting on the fully compressed shocks right now. Don’t worry, I’m not driving it. This was purely to get an idea of how it would sit. But this is about what I’m looking for. Sent...
  10. Kaeden

    "Laying Back" with 6" Fabtech Lift?

    I’d really rather not lift the front just because I don’t wanna mess with my CV axles anymore. I seem to snap a CV every time I put it in 4WD regardless or how easy or hard I am on it. That leads me to believe there’s clearly a problem somewhere up front, I just haven’t gotten that far yet...
  11. Kaeden

    CV spacers vs NNBS CV axles

    What about running these CV Axles with 3" spacers included with a Fabtech 6" lift? Looking for a longer axle solution my self
  12. Kaeden

    "Laying Back" with 6" Fabtech Lift?

    Alright guys so I have a question. I'm interested in "squatting" the rear of my Tahoe. I know it's a very controversial topic and I'm honestly not sure how I feel about it. I like it on some things, and not on others. That being said, I'd like to see how it would look on my Tahoe. I can always...
  13. Kaeden

    Snapped EZ Out in Broken Knock Sensor Stud. About to lose my mind

    Yeah turns out there is actually a relocation kit I believe. I’m not positive of that but I had a buddy tell me that. Oh well though I guess. Managed to get the sensors put back in their original places and got some cleaning up done while I was in there.
  14. Kaeden

    Snapped EZ Out in Broken Knock Sensor Stud. About to lose my mind

    Oh that’s the plan sooner or later [emoji57] Sent from my iPhone using Tapatalk
  15. Kaeden

    Snapped EZ Out in Broken Knock Sensor Stud. About to lose my mind

    Thanks guys but I got it out. Used a dremel to grind away the EZ Out then started drilling the stud out and then used helicoil. Sent from my iPhone using Tapatalk
  16. Kaeden

    Snapped EZ Out in Broken Knock Sensor Stud. About to lose my mind

    Yes absolutely. I pulled the valley cover and am now working with it off. Sorry I would post pictures but for some reason Tapatalk is not allowing me to post from my phone Sent from my iPhone using Tapatalk
  17. Kaeden

    Snapped EZ Out in Broken Knock Sensor Stud. About to lose my mind

    Confirmed. Just tried it to see what was there and they do in fact thread to the block not the valley pan.
  18. Kaeden

    Snapped EZ Out in Broken Knock Sensor Stud. About to lose my mind

    They don’t thread into the valley tray though do they? I was under the impression they thread into the block Sent from my iPhone using Tapatalk
  19. Kaeden

    Snapped EZ Out in Broken Knock Sensor Stud. About to lose my mind

    So I was changing knock sensors last weekend.. the front one came out just fine, however the actual sensor part of the rear one literally fell off (presumably due to rust) the stud part as soon as I went to put a socket on it. That being said, I spent hours, countless hours last weekend drilling...
  20. Kaeden

    Front Bose Door Speaker Amp Location and Wiring Issue

    Hey Guys! So I've got an interesting problem. A couple months ago a friend of mine asked to use the Tahoe's factory cigarette lighter, and thinking nothing of it, I allowed them to use it. When they put it back in the socket however, I believe it got stuck in, ultimately overheating and very...
  21. Kaeden

    2005 Tahoe Z71 on 6 Inch Fabtech Noise From Rear End

    Hey guys! So I noticed a popping noise from my rear end a couple months ago and just haven’t had the time to look at it. Well I noticed in the last couple days that it’s popping more. It seems to only occur when I’m taking turns at slow speed or when the suspension flexes. I can’t tell if it’s...
  22. Kaeden

    Cig Lighter, Front Door Speaker Problem

    Haven’t gotten that far yet
  23. Kaeden

    Cig Lighter, Front Door Speaker Problem

    The only wires I’ve found so far that are burnt are the cigarette lighter fuse wires. And they were burnt on both the underside of the fuse box and the back side of the cigarette lighter
  24. Kaeden

    05 5.3L Tahoe Misfire/Running Rough Issue; Stumped

    Here’s a little update for everybody. The first shop I took it too checked all the sensor wires and stuff and determined it was the PCM. So I ordered a PCM and had him put it in and had no luck. I then had it towed to the dealer. The dealer had it for about a week again checking wires and...
  25. Kaeden

    Cig Lighter, Front Door Speaker Problem

    Alright guys so I’ve got a problem. My cigarette lighter got stuck on last night and it’s been nothing but down hill since then. When it got stuck on it burn the socket inside the vehicle for it and burn the fuse out of the engine fuse box. At the same time it went out, my front door speakers...

Forum statistics

Threads
129,105
Posts
1,810,364
Members
92,180
Latest member
Bekahgentry

Latest posts

Top