Search results

  1. Walrusmt

    Air in brake line

    Well i replaced the master cylinder after bench bleeding a new one. I then bled all four wheels from farthest to nearest. No air came out at wheels. Pedal response was a bit better, but still soft. Also the brake light and abs light came on. Looks like I'm going to have to tow it to the shop...
  2. Walrusmt

    Air in brake line

    It's like you were living my life lol. Exact same thing happened to me - I'm heading into the drive to follow the process again, this time with a different helper. Hopefully my results are as good as yours.
  3. Walrusmt

    At my wit's end and about ready to light this thing of fire

    LOL, I'm a bit embarrassed to say I've used my kids to reach places I could not... They were happy to help!
  4. Walrusmt

    2dr frame off questions.

    Looks like a great ride - I understand the desire to protect it and do it right. Sounds like it's not your daily driver, so the options expand from there. I'm considering this myself. For starters, you'll be hard pressed to find a step-by-step on the process, simply too much information and...
  5. Walrusmt

    At my wit's end and about ready to light this thing of fire

    First, I'm sorry for the trouble - and sorry no one has responded! Have you fixed the trouble or can you provide an update? Any pics of the leaking area? Your description is good, but I'm a visual guy so pics help. Thanks,
  6. Walrusmt

    Engine replacement options

    I'm going down this road as well. Ultimately cost was a factor. I was able to get a 96 vortec 454 - including the harness and all the accessories for $350. The fact that the 454 fits existing mount points is a plus. The electronics that came with the 454 bolt in the same place - no new wires to...
  7. Walrusmt

    Getting my 1996 Yukon back on the road

    Good job! Do you have any pics to share of your hard work? I've got a 96 yukon as well.
  8. Walrusmt

    LSD Upgrade

    Thanks for the topic - I'm considering replacing the diff as well. However I'm not sure about the pinion bearing. Question - when I removed the pinion nut the yolk practically fell off, and the pinion bearing slides back and forth on the pinion shaft. Is this normal? I've worked on these...
  9. Walrusmt

    1996 Chevy Tahoe 4x4 suspension issues

    I know it's a late response - but I wanted to commend you on the summary - I wish my mechanic was that direct! I'm still paying on the muffler bearing overhaul...
  10. Walrusmt

    Painting Stock wheels black

    Literally bought these rims,tires and the spare for $60 so I could return to the stock offset. I was thinking about painting them black, but after seeing your pics I think I'll stick with the alloy finish. Just a preference- I like both the same, so why put the effort forth.
  11. Walrusmt

    '95 Tahoe 2dr Spare Tire Mount

    Hey guys, I know this topic is stone cold, but I wanted to expand on the information for the sake of the group. I'm "restoring" my 96 gmc and finding the parts the PO threw away is a bit of a task. Every little bit helps. Here are the part numbers and a diagram...
  12. Walrusmt

    Input please.. Front end work

    Agree completely. Honest recommendation is to replace the parts yourself, then take the truck in for an alignment and call it a day. You'll be hundreds ahead and proud of your work. Personally, I've never found the elusive shop that will do repairs with parts you provide. I've called around...
  13. Walrusmt

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

  14. Walrusmt

    1996 Yukon 4x4 transmission replacement options...

    I’m doing mine. Here’s what I did when swapping the transmission 1. Get underneath and take pics, make sure the wires and plugs are the same. I know this is a pain, but it was easier for me than pulling just o find out later. If the wires and plugs match up you should be oK. Sent from my...
  15. Walrusmt

    Rebuild 350 or swap in 383 in 96 2 door yukon

    Thanks again for the tip. I swapped the ICM yesterday. The one I pulled off looked like new, even had the “Singapore” laser print on the face. However there was very little thermal paste on the surfaces. I smeared the new surfaces with an even layer. Hopefully it will work. I’ve got another cap...
  16. Walrusmt

    1999 Tahoe LT

    X Three on the vacumm leak. Also check the timing. On my Yukon the truck pulled against the break when the timing was too advanced - maybe a random condition, but when I corrected the timing the problem went away.
  17. Walrusmt

    Rebuild 350 or swap in 383 in 96 2 door yukon

    That would be ideal. This is my daily driver and I don't have the down time to pull the engine, rebuild it and re-install. I could probably take off a week to do the removal and install, but that's it.
  18. Walrusmt

    Rebuild 350 or swap in 383 in 96 2 door yukon

    Thanks for the input. It's a cheap and easy fix so I'll investigate. I thought the symptoms of a bad ICM was failed start or rough idle. None of those are a problem here. Cap just stops working after a couple of months.
  19. Walrusmt

    Rebuild 350 or swap in 383 in 96 2 door yukon

    Thanks a ton for the advice - especially the 70 Camaro comparison. Oil pressure is around 50 at when I start the engine in the morning, but once it warms up drops to around 20 PSI. I will keep the L31 as is, patch up the leaks - see how it goes. Other than eating distributor caps and rotors the...
  20. Walrusmt

    Rebuild 350 or swap in 383 in 96 2 door yukon

    Hey folks, My 96 has 140k on it, but the previous owner ran it 3 quarts low. I know a rebuild is due, but I’m looking for an opinion from the forum on the next step. Since they only made the 2 door Yukon with the 350 Vortec in 96 is there any value in keeping it stock/original? Or is it ok to...
  21. Walrusmt

    New here, Hunting for a 2 dr 92-99 in South Denver

    Thanks. It likes to eat caps and rotors every couple of months. swapped out the distributor but that didn't help. I've got a shop here in Boise that will look at it tomorrow. Your ride looks great to - man I love these trucks. Probably one of the best GMC made. (I'm biased of course)
  22. Walrusmt

    New here, Hunting for a 2 dr 92-99 in South Denver

    Bought mine (see image) for $3K in Boise last August. 130K mileage, zero rust and leather. Everything in Denver cost a ton. do a craigslist search in Idaho, NM, AZ, even UT. It's a pain I know, but saving 3-4 grand is worth the trouble.
  23. Walrusmt

    2 door back seat???

    Late to the game I know - but there is a lever you pull under the passenger side of the rear seat. Pull that, hold it, then pull the strap on the back of the seat (bit of a stretch). It will come down. The rest are correct - remove head rest first and move seats up a bit just in case. It's a...
  24. Walrusmt

    96 GT fresh out the interior shop

    Wow - Those inserts really set it off. I was just going to paint mine lol - now I'm going for the leather!
  25. Walrusmt

    finally got my headline done and put in all suede

    Super nice job! You may have already said - but what did it cost?

Forum statistics

Threads
129,117
Posts
1,810,706
Members
92,203
Latest member
firedog9518

Latest posts

Top