Search results

  1. H

    tpms issues

    they must be reading the new wheels cause I used to keep my old wheels around 35psi and after installing the Silverado wheels 3 of them read around 23/26/28 and 1 wheel shows 0. I never kept track to see if the numbers change on their own or change when I add air but like I said before sometimes...
  2. H

    2009 Yukon XL Denali - Front & Rear Suspension Refresh

    z55 suspension replacements are about 250 each. I just replaced mine last year with acdelco. arnott sells replacement rear z55's but not fronts. everything they sell for the fronts are conversions
  3. H

    tpms issues

    my Yukon is an 11 and I don't know what year Silverado the wheels came off of but I was thinking if it's a different mhz would it even register a reading?
  4. H

    tpms issues

    no I didn't. I would drive and sometimes get the service tire pressure message and have no readings then the message would go away and I have 4 completely wrong readings.
  5. H

    tpms issues

    I put a set of Silverado wheels on my Yukon, and I can't get the tpms sensors to work. They're reading incorrect numbers, and sometimes they don't read at all. I did the relearn procedure the manual way and using a tech 2 scanner, and both ways it says it's been learned but continues to show...
  6. H

    Converting back the Z55 Air Ride Suspension

    ok so after messing around with my tech 2. At a stop I'm at 20% or 21%, once I start moving, I'm at 0%. each shock does adjust individually and I'm seeing the full range up to 95% so I'm guessing I'm good
  7. H

    ESCM reset?

    ANY UPDATES?
  8. H

    Converting back the Z55 Air Ride Suspension

    I believe they fluctuate individually but I'll have to check again to confirm. I do know at a stop they are all at 20% and when I start driving they go down to 0
  9. H

    Converting back the Z55 Air Ride Suspension

    I'm noticing this problem now after my new rears, nothing higher than 20%. should I just go straight for a new ESCM?
  10. H

    Is my Burb a 1 of 4 car?

    sucks you gotta pay for it
  11. H

    how do these struts look

    im going to return them. they agreed to pay for return shipping. rating is 99.5%
  12. H

    how do these struts look

    i don't feel like they were previously installed but just a little disappointed in the condition. i paid $500 from a seller on ebay, rating is 99.5% nuts on the bottom look clean
  13. H

    how do these struts look

    ordered these struts and this is the condition they came in. the seller's response... Hi, it is new. That is box fibers and the box polished the paint off of the shock. All from shelf / transit wear. It is new and ready to serve you. The spring seat is loose and slides up and down the strut...
  14. H

    Yukon Denali XL (2011) - Radiator Replacement - Oil Cooler Line Issue

    I was just gonna ask this. I think the flush should be with the old radiator so you don't contaminate the new one but I'm not sure
  15. H

    coolant leak from reservoir

    what's this piece here? thought my old tank was leaking from there so I replaced it and the new one is doing the same thing.
  16. H

    help choosing a radiator

    lol typo I meant 3728. I actually got the 2 csf part numbers mixed up.
  17. H

    help choosing a radiator

    i just ended up getting the csf 3128 radiator through rock auto. $170 all in
  18. H

    doing a z55 refresh

    the spring removal was another question that crossed my mind. I'm guessing i should definitely get a spring compressor? at first I was thinking of just clamping them down on both sides because that was what i used to do on my civic but if you're saying it's under an unusual amount of pressure...
  19. H

    doing a z55 refresh

    seems like too much work for my set-up at home.
  20. H

    doing a z55 refresh

    I will be changing the control arms just not right now
  21. H

    help choosing a radiator

    i do have both trans and oil cooler
  22. H

    help choosing a radiator

    after looking online my oem radiator is gm#22840115 or acdelco#21648. after looking at rock auto i see about 10 different choices... which one do you think is the best value?
  23. H

    doing a z55 refresh

    after watching a video on youtube im not doing all that
  24. H

    doing a z55 refresh

    its 2 brackets? left and right? is it worth saving the 100 and pressing them in myself or would i need a special tool
  25. H

    doing a z55 refresh

    i got the sway bar links, not the bushings but I'll look into it

Forum statistics

Threads
129,174
Posts
1,811,673
Members
92,269
Latest member
davonlwilliams33

Latest posts

Top