Search results

  1. h0tr0d

    about to lift, what to rebuild first?

    What is your gear ratio? My sun-shell snapped in the tranny even though I drive like a grandma and I only have 33's.
  2. h0tr0d

    Wet carpet in the cargo area

    My barn doors are leaky too. Every time we get a good rain My cargo area carpet gets wet. I'd be interested in a fix if you get it figured out. Pretty sure it's the door seals though.
  3. h0tr0d

    I think I might have blown something in my transfer case today.

    I've always had manual cars, and in the instances where I needed another automatic, I've actually had a good spare laying around to throw in. This is the first time that's not the case and with money being extremely tight right now, I can't afford to just grab a rebuilt one. I do have a couple...
  4. h0tr0d

    I think I might have blown something in my transfer case today.

    Thanks xanatost. I'll be crawling under mine as soon as the rain stops here...it's been non-stop for a solid week. After reading all this material and watching some videos, it actually doesn't look as hard as I had imagined in my head.
  5. h0tr0d

    I think I might have blown something in my transfer case today.

    Thank you sir! You're the best!
  6. h0tr0d

    I think I might have blown something in my transfer case today.

    Thanks for your help man. Sounds like a fun time. :emotions122: At least I get to try out rebuilding an auto tranny for the first time.
  7. h0tr0d

    I think I might have blown something in my transfer case today.

    @SunlitComet - You were definitely onto something. I have no reverse gear now. :(
  8. h0tr0d

    I think I might have blown something in my transfer case today.

    I don't think I tried reverse, but otherwise it drives fine...just a whining noise coming from around the transfer case/tranny area. I didn't try to engage 4x4 and drive it after it happened either. I don't think it's throwing a code, but I'll hook up my reader tomorrow to be sure. ----------...
  9. h0tr0d

    I think I might have blown something in my transfer case today.

    I left work and 2 miles away, pulled out onto a road that had a slight up-hill climb and as soon as I gave it a little gas I heard a loud bang, then a high pitch whining. I pulled over and noticed the LED indicator on the transfer case control was off. I tried pushing the 2hi button and...
  10. h0tr0d

    285 70 17. will they fit

    Thanks. The edges of the tires rub at the bottoms of the wheel openings in the back where it curves towards the center of the vehicle. It could be trimmed easily and not noticeable unless you knew what to look for. The valance also rubs at the back corner when the wheels are half-lock, but...
  11. h0tr0d

    285 70 17. will they fit

    I've got 285 Terra Grapplers on 4.5" BS rims. Check out the pics in my profile. I rub still even with a 2" crank. Keep in mind, I have factory flares that stick out a tiny bit more and still have the factory valance. They look good, but if I had to do it over again, I'd just grab some 265...
  12. h0tr0d

    Fender flares

    No, they were an option on all of them. I have them on my SLT 4x4. The best place to get them is probably going to be the junkyard. Make sure you get them from a 4 door tahoe/yukon since they're in two pieces unlike the 2doors and 'burbans.
  13. h0tr0d

    No Spark

    Thanks for your help man...you saved me. I replaced the distributor cap and rotor and she's purring like a kitten again. I'm guessing since the spark plugs were so terrible, it caused the distributor to break down. The underside of the distributor terminals were corroded white and the rotor...
  14. h0tr0d

    No Spark

    Awesome man! Thanks so much....I'm going to run outside and test it now. ---------- Post added at 01:03 PM ---------- Previous post was at 12:38 PM ---------- Ok, the coil resistance was fine and I attached a spark plug wire directly to the coil and got spark. I suppose the next step is...
  15. h0tr0d

    No Spark

    Do you know what the resistance readings are supposed to be between the three pins of the coil? It looks like no matter which way I try, I'm getting 0.1 ohms between the pins.
  16. h0tr0d

    No Spark

    No, I just checked it at the plug. I'm not quite sure how to test the ignition coil. I'll see what I can dig up on google aboue the process.
  17. h0tr0d

    No Spark

    Hey guys, I was on my way to work this morning when my truck sputtered out. I thought I was out of gas, but that wasn't it. I pulled a plug and they looked like the originals with several electrodes just trashed so they probably have 220K miles on them. I replaced 'em, but I still have no...
  18. h0tr0d

    What do you think is happenning...

    Did you get it figured out man? My '99 Yuk daily driver sputtered out like it was out of gas today. I've got no spark now...oh well, didn't feel like going to work anyway.
  19. h0tr0d

    What do you think is happenning...

    I'm not an expert, but that sounds an awful lot like some clogged injectors.
  20. h0tr0d

    How can I get a window that's stuck in the up position out of the door?

    I put my rage face on and ripped that shit out. It's a '99...like my sig says and OBS since I'm posting in the OBS section. There are no bolts on the back of the track like the NBS windows. I guess if your window is stuck up, you have to lower the inner door skin with the window attached all...
  21. h0tr0d

    How can I get a window that's stuck in the up position out of the door?

    Hey guys, I've been riding around with the window stuck up for over a year now and I'm posting this back up again so that maybe a fresh face might know how to do it. The window motor is kaput, it won't budge at all. I've gotten all the way down to trying to wiggle the inner door skin and...
  22. h0tr0d

    Cheapest way to lift..?

    Grab an 18mm socket and a breakover bar to make it easy. You'll also need a tape measure and a level surface. Measure from the ground to the same point on the body or frame. Turn the torsion bolts in the same amount counting the turns with the breakover bar as you go and just make it even on...
  23. h0tr0d

    285's on stock Denali ?

    I run 285's and have rubbing sometimes. Your denali looks like it's cranked to the max already. Can you confirm? I need to crank mine up a little more since adding my ranch hand made me sag back down to where the tires rub at half lock over bumps. I'll probably opt for 265's when I need to...
  24. h0tr0d

    Finishing Build Thread

    Lookin' good dude! You still painting her orange?
  25. h0tr0d

    Tire sizes for 97 4x4

    Sergio is rocking some 15" soft 8's with 31's (~265's): Scroll about halfway down: http://tahoeyukonforum.com/forum/showthread.php?t=17223&page=2 Check my pics to see some 285/70/17 on mine with a 2" torsion bar crank.

Forum statistics

Threads
129,179
Posts
1,811,762
Members
92,275
Latest member
DP2024

Latest posts

Top