Search results

  1. I

    A/C manifold/ vacuum pump issue

    I have a manifold gauge set and vacuum pump purchased from harbor freight. I've had this set for more than a few years now. I was checking for leaks by pulling a vacuum on the system. It was pulling down -40 (which I believe is against the post) and when I shut the vacuum pump off the garage...
  2. I

    Fuel pump upgrade?

    Did you notice the one you sent me was the 12 psi model? Are you saying I should just use the net plastic style as opposed to getting the older style sending unit?
  3. I

    Fuel pump upgrade?

    So I'm doing the fuel pump upgrade. I have purchased a fuel pump. It's for the older style with the metal lines instead of the one that I have which is the plastic body with what appears to be a non replaceable pump. The hoses seem as though the don't come off. Seems as though the only option is...
  4. I

    95 Yukon free TBI mods

    Bueller?
  5. I

    95 Yukon free TBI mods

    I apologize for bringing this up. I've searched the forum but can't find the info. In a thread I saw about TBI performance mods, there was a mention of "taking the black thing out of the fender". Can anyone elaborate on this for me? Thank you in advance, Michael
  6. I

    95 camshaft selection

    Thanks , exp500, for the reply. I'm very new to cam selection. Can you educate me on what makes this cam incompatible? Thanks in advance
  7. I

    95 camshaft selection

    Summit said Comp Cams recommends this camshaft. It seems like too much lift. COMP Cams CL12-249-4 COMP Cams Xtreme Energy Cam and Lifter Kits | Summit Racing
  8. I

    1999 Tahoe mode blend door

    Does the entire box have to be pulled to replace the upper dampers as shown in the picture?
  9. I

    Y pipe and cat

    I was wondering if anyone has used a setup like this listing. https://www.summitracing.com/parts/wlk-50300/overview/ Is this still the same as the restrictive stock Y pipe? I'm looking for performance gains. I'm wondering if I should just go with the Flowmaster Y250300 Scavenger Y Collector...
  10. I

    Washer fluid leaking from sprayer

    Hey, Derek. As I said in my post, I do get a spot on the ground. The leakage is not a lot. It just looks like a lot on the ground. I would get a spot about a foot in diameter and only after I'd been driving. I also see the blue deposits from the leakage on the firewall just below the cowl...
  11. I

    Washer fluid leaking from sprayer

    I have a 95 GMC Yukon. I've noticed puddles under the left or right side, depending on the slant of the ground where the vehicle is sitting. The leak is coming from the washer fluid, but not from the tank or any hoses. There isn't any fluid on the fender well where the tank is mounted. The fluid...

Forum statistics

Threads
129,188
Posts
1,811,870
Members
92,292
Latest member
kwhaleys

Latest posts

Top